SLVUB34A April   2017  – August 2021 TPS561201

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Setpoint
  5. 4Test Setup and Results
    1. 4.1  Input/Output Connections
    2. 4.2  Start-Up Procedure
    3. 4.3  Efficiency
    4. 4.4  Load Regulation
    5. 4.5  Line Regulation
    6. 4.6  Load Transient Response
    7. 4.7  Output Voltage Ripple
    8. 4.8  Input Voltage Ripple
    9. 4.9  Start-Up
    10. 4.10 Shut-Down
  6. 5Board Layout
    1. 5.1 Layout
  7. 6Schematic, Bill of Materials, and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

Shut-Down

The TPS561201EVM-896 shut-down waveform relative to VIN is shown in Figure 4-12. Load = 1.05 Ω resistive.

The TPS561201EVM-896 shut-down waveform relative to EN is shown in Figure 4-13. Load = 1.05 Ω resistive.

GUID-D52C50B1-6633-4A88-943B-4DCD88AC4799-low.pngFigure 4-12 Shut-Down Relative to Input Voltage
GUID-C62AE13F-5ADA-4A76-B7B8-6693DC23A373-low.pngFigure 4-13 Shut-Down Relative to EN