SLVUCL6 March   2023

 

  1.   TPS62876EVM-198 Evaluation Module
  2.   Trademarks
  3. 1Warning and Caution
  4. 2Introduction
    1. 2.1 Performance Specification
    2. 2.2 Modifications
      1. 2.2.1 Input and Output Capacitors
      2. 2.2.2 Output Voltage Setting
      3. 2.2.3 Control Loop Compensation
      4. 2.2.4 Switching Frequency Setting
      5. 2.2.5 I2C Interface
  5. 3Setup
    1. 3.1 Connector Descriptions
    2. 3.2 Hardware Setup
  6. 4TPS62876EVM-198 Test Results
  7. 5Board Layout
  8. 6Schematic and Bill of Materials
    1. 6.1 Schematic
    2. 6.2 Bill of Materials

5 Board Layout

This section provides the TPS62876EVM-198 board layout. The gerber files are available on the TPS62876EVM-198 tool page.

Figure 5-1 Top Silk
Figure 5-3 Layer 2
GUID-20230102-SS0I-9FHT-1S1G-3W6FLPXB9NZW-low.pngFigure 5-5 Layer 4
Figure 5-7 Layer 6
GUID-20230116-SS0I-SJZT-X6VW-QCQRHKWKLG2P-low.pngFigure 5-9 Bottom Layer
Figure 5-2 Top Layer
GUID-20230102-SS0I-DBFR-9W6Z-6RS9LNQSBD43-low.pngFigure 5-4 Layer 3
GUID-20230102-SS0I-RQTZ-G9QN-KSKFBV4LWVWW-low.pngFigure 5-6 Layer 5
Figure 5-8 Layer 7