SLVUDB6 August   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Power Requirements
    3. 2.3 Setup and Connecting the EVM
    4. 2.4 Header and Jumper Information
    5. 2.5 Push Buttons and Switches
    6. 2.6 Driver Interfaces
    7. 2.7 Test Points
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 Software Installation
      1. 3.2.1 Downloading USB2ANY Firmware (For USB2ANY Explorer or TXE81XXEVM-GUI)
    3. 3.3 GUI Installation
      1. 3.3.1 USB2ANY Explorer GUI
      2. 3.3.2 TXE81XXEVM-GUI
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
    2. 5.2 Terminology

3.3.2 TXE81XXEVM-GUI

In the case that the EVM is not loaded with the most up-to-date firmware, follow steps 1-3 of the previous section "Downloading USB2ANY Firmware."

Follow the steps to use the full function TXE81XXEVM GUI through GUI Composer

  1. Make sure that the USB2ANY Explorer GUI is closed.
  2. Using Google Chrome, download the Cloud Agent here.
  3. Make sure that USB 3.0 is being used for the TXE81XXEVM.
  4. The TXE81XXEVM-GUI can be accessed through the link here.