SLVUDI8 September   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 EVM Connection
    2. 2.2 Jumper Information
    3. 2.3 EVM Theory and Operation
      1. 2.3.1 Setting the Cathode Current (IKA)
      2. 2.3.2 Setting the Cathode Voltage (VKA)
      3. 2.3.3 Checking Stability and Transient Response
    4. 2.4 Test Modes
  9. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  10. 4Compliance Information
    1. 4.1 Compliance and Certifications
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation

6 Related Documentation

The documents in Table 6-5 provide information regarding Texas Instruments integrated circuits used in the assembly of the TLA431EVM. This user's guide is available from the TI web site under literature number SLVUDI8. Any letter appended to the literature number corresponds to the document revision that is current at the time of the writing of this document. Newer revisions are available from the TI web site at www.ti.com, or call Evaluation Module the Texas Instruments Literature Response Center at (800) 477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and literature number.

Table 6-1 Related Device Documentation
ItemLiterature Number
TLA431 product data sheetSNVSCR4