SNAU298 October   2023

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 EVM Quick Start
      1. 2.1.1 Hardware Setup
      2. 2.1.2 Measure
    2. 2.2 Device Operation Modes
    3. 2.3 EVM Configuration
      1. 2.3.1 Power Supply
      2. 2.3.2 Logic Input and Outputs
      3. 2.3.3 Clock Input
      4. 2.3.4 Clock Outputs
      5. 2.3.5 Status Outputs, LEDs, and Test Points
  8. 3Software
    1. 3.1 Software Installation
      1. 3.1.1 Software Setup
      2. 3.1.2 Program and Setup
    2. 3.2 TICS Pro LMKDB1120 Software
      1. 3.2.1 Input
        1. 3.2.1.1 Input Interface Type
        2. 3.2.1.2 Input Termination
        3. 3.2.1.3 Automatic Output Disable (AOD)
        4. 3.2.1.4 LOS Event
        5. 3.2.1.5 LOS Readback
      2. 3.2.2 Device Info
        1. 3.2.2.1 EVM Setup
        2. 3.2.2.2 SMBus
      3. 3.2.3 Output
        1. 3.2.3.1 SMBus
        2. 3.2.3.2 OE Pin Control
        3. 3.2.3.3 Side Band Interface (SBI)
  9. 4Implementation Results
    1. 4.1 Typical Phase Noise Characteristic
  10. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  11. 6Compliance Information
    1. 6.1 Compliance and Certifications
  12. 7References

Schematics

GUID-20231010-SS0I-V3KT-GPVS-8CBHH7GMPHLR-low.svg Figure 5-1 Power Supply (External and USB option)
GUID-20231010-SS0I-SJD0-KKH1-LXSVPLJFPRNF-low.png Figure 5-2 LMKDB1120 Device and CLKIN_P/N Reference
GUID-20231010-SS0I-FVF8-0T6B-JTKJQMNNV7QV-low.svg Figure 5-3 Clock Outputs CLK0 to CLK7
GUID-20231010-SS0I-B3XX-RZ1L-RPX4MBXRVPTN-low.svg Figure 5-4 Clock Outputs CLK8 to CLK15
GUID-20231010-SS0I-B7XL-GHJT-ZPSN7V4HX5CJ-low.png Figure 5-5 Clock Outputs CLK16 to CLK19
GUID-20231010-SS0I-NHLR-L3P2-K8KHDRXDMHSP-low.png Figure 5-6 Output Enable Pins (OE#)
GUID-20231010-SS0I-G1C2-BTD1-96BNGLG5KBMD-low.svg Figure 5-7 Logic I/O Jumpers
GUID-20231010-SS0I-15T3-RHHS-FJ3T6PHPMSJ5-low.svg Figure 5-8 Status LEDs and Test Points
GUID-20231010-SS0I-NN2Q-ZQ0Q-9J6XVCDSFDCS-low.png Figure 5-9 USB Schematic
GUID-20231010-SS0I-JRMS-61DN-3PSB07NSKRXS-low.png Figure 5-10 I/O Expander, MUX and Buffer used for SBI and OE pin Control