SNIU041B May   2021  – August 2022 TMP114

 

  1.   TMP114EVM User's Guide Abstract
  2. 1Trademarks
  3. 2Overview
    1. 2.1 EVM Kit Contents
  4. 3EVM Hardware
    1. 3.1 TMP114EVM Board
    2. 3.2 Perforations
    3. 3.3 Subregulator
    4. 3.4 Logic Level Translator
    5. 3.5 Status LEDs
    6. 3.6 Programming Header
    7. 3.7 BSL Button
    8. 3.8 EVM Operating Conditions
  5. 4Software Download
    1. 4.1 Live Software on dev.ti.com
    2. 4.2 Offline Software
      1. 4.2.1 Download from dev.ti.com
  6. 5Software
    1. 5.1 Home Tab
    2. 5.2 Data Capture Tab
    3. 5.3 Settings Tab
    4. 5.4 Registers Tab
    5. 5.5 Collateral Tab
  7. 6Schematic, Board Layout and Bill of Materials
    1. 6.1 Schematic
    2. 6.2 Printed Circuit Board (PCB)
    3. 6.3 Bill of Materials
  8. 7Revision History

2.1 EVM Kit Contents

Table 2-1 details the contents of the EVM kit. Contact the Texas Instruments Product Information Center nearest you if any components are missing. TI highly recommends that users check the TI website at https://www.ti.com to verify that they have the latest versions of the related software.

Table 2-1 EVM Kit Contents
Item Quantity
TMP114EVM 1
CAUTION:

The TMP114 integrated circuit and other components on the TMP114EVM can be damaged by electrostatic discharge (ESD). Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure.

GUID-EAAB28C3-83F5-450D-BD17-FCCBE55A4A63-low.png