SFFSBP4 November   2026 TLIN829-Q1

 

  1.   1
  2.   Trademarks
  3. 1Overview
  4. 2Functional Safety Failure In Time (FIT) Rates
    1. 2.1 SOIC (D, 8) Package
    2. 2.2 VSON (DRB, 8) Package
  5. 3Failure Mode Distribution (FMD)
  6. 4Pin Failure Mode Analysis (Pin FMA)
    1. 4.1 SOIC (D, 8) Package
    2. 4.2 VSON (DRB, 8) Package
  7. 5Revision History

SOIC (D, 8) Package

Figure 4-1 shows the TLIN829-Q1 pin diagram for the SOIC (D, 8) package. For a detailed description of the device pins, see the Pin Configuration and Functions section in the TLIN829-Q1 datasheet.

TLIN829-Q1 Pin Diagram (D, 8-Pin (SOIC)) PackageFigure 4-1 Pin Diagram (D, 8-Pin (SOIC)) Package
Table 4-2 Pin FMA for Device Pins Short-Circuited to Ground
Pin NamePin No.Description of Potential Failure EffectsFailure Effect Class
RXD1The RXD pin is biased dominant; communication from the LIN bus to the MCU is not possible.B
EN2The device potentially only operates in standby mode after power-on. If a short occurs in normal mode, the part is forced to enter sleep mode and potentially disables LIN communication.B
NC3NC is not connected and has no effect on device behavior.D
TXD4The TXD pin is biased dominant; communication from the MCU to the LIN bus is not possible.B
GND5None.D
LIN6The LIN pin is biased dominant; LIN communication is not possible.B
VSUP7The device is not powered and does not function.B
NC 8 NC is not connected and has no effect on device behavior. D
Table 4-3 Pin FMA for Device Pins Open-Circuited
Pin NamePin No.Description of Potential Failure EffectsFailure Effect Class
RXD1Communication from the LIN bus to the MCU is not possible.B
EN2The EN pin is biased low due to internal pulldown, so the device is in standby mode.B
NC 3 NC is not connected and has no effect on device behavior. D
TXD4Communication from the MCU to the LIN bus is not possible.B
GND5The device is not powered and does not function.B
LIN6LIN communication is not possible.B
VSUP7The device is not powered and does not function.B
NC 8 NC is not connected and has no effect on device behavior. D
Table 4-4 Pin FMA for Device Pins Short-Circuited to Adjacent Pin
Pin NamePin No.Shorted toDescription of Potential Failure EffectsFailure Effect Class
RXD1ENThe device goes into sleep mode when a dominant bit is received on the LIN bus, disabling communication.B
EN2NCNC is not connected and has no effect on device behavior.D
NC3TXDNC is not connected and has no effect on device behavior.D
GND5LINThe LIN pin is biased dominant, LIN communication is not possible.B
LIN6VSUPThe LIN pin is biased recessive, LIN communication is not possible.B
VSUP7NCNC is not connected and has no effect on device behavior.D
Table 4-5 Pin FMA for Device Pins Short-Circuited to VSUP Supply
Pin NamePin No.Description of Potential Failure EffectsFailure Effect Class
RXD1There is an absolute maximum voltage violation, and the transceiver is potentially damaged.A
EN2There is an absolute maximum voltage violation, and the transceiver is potentially damaged.A
NC 3 NC is not connected and has no effect on device behavior. D
TXD4There is an absolute maximum voltage violation, and the transceiver is potentially damaged.A
GND5The device is not powered and does not function.A
LIN6The LIN pin is biased recessive, LIN communication is not possible.B
VSUP7NoneD
NC 8 NC is not connected and has no effect on device behavior. D