SLAAEK6 June 2024 ULC1001 , ULC1001-Q1
6 Example: CAD Drawings for Aperture = 15mm
CAD Drawings for Aperture = 15mm
This section shows an example of the 15mm aperture LCS design. Note that the transducer's inner diameter is the equivalent aperture here. The .STEP files for this example are also available.
The transducer dimensions are shown in Figure 6-1.
Figure 6-1 Transducer DimensionsThe lens dimensions are shown in Figure 6-2.
Figure 6-2 Lens DimensionsThe thin film dimensions are shown in Figure 6-3.
Figure 6-3 Thin Film DimensionsThe glue fixture base dimensions are shown in Figure 6-4.
Figure 6-4 Glue Fixture Base
DimensionsThe glue fixture cap dimensions are shown in Figure 6-5.
Figure 6-5 Glue Fixture Cap
DimensionsThe housing base dimensions are shown in Figure 6-6
Figure 6-6 Housing Base
DimensionsThe housing cap dimensions are shown in Figure 6-7.
Figure 6-7 Housing Cap DimensionsThe housing foundation dimensions are shown in Figure 6-8.
Figure 6-8 Housing Foundation Dimensions
The M2 screw dimensions are shown in Figure 6-9
Figure 6-9 M2 Screw DimensionsThe M1.4 screw dimensions are shown in Figure 6-10.
Figure 6-10 M1.4 Screw Dimensions