SLAU938 March   2024 ISOM8610

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 EVM Setup and Operation
    2. 2.2 Pin Configuration of the ISOM8610 Normally Open Opto-emulator Switch with Integrated FET Output
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout and 3D Diagram
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1. 4.1 Trademarks

3.2 PCB Layout and 3D Diagram

Figure 4-2 and Figure 4-3 show the printed-circuit board (PCB) layout top and bottom, respectively, and Figure 4-4 shows a 3D diagram of the EVM PCB.

GUID-20240325-SS0I-DVLD-SX4R-CNCCQ9F7RQWT-low.png Figure 3-2 ISOM8610DFGEVM PCB Layout - Top
GUID-20240325-SS0I-0CPK-CQQM-XZRJKNNF7JPW-low.png Figure 3-3 ISOM8610DFGEVM PCB Layout - Bottom
GUID-20240325-SS0I-8KBL-MXPP-CNS4K01LHSMB-low.png Figure 3-4 ISOM8610DFGEVM PCB 3D Diagram