SLAZ759B December   2024  – July 2026 MSPM0L1116 , MSPM0L1117

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Functional Advisories
  5. 2Preprogrammed Software Advisories
  6. 3Debug Only Advisories
  7. 4Fixed by Compiler Advisories
  8. 5Device Nomenclature
  9. 6Advisory Descriptions
    1. 6.1  ADC_ERR_05
    2. 6.2  AES_ERR_01
    3. 6.3  CLK_ERR_02
    4. 6.4  CPU_ERR_02
    5. 6.5  CPU_ERR_03
    6. 6.6  CPU_ERR_04
    7. 6.7  DMA_ERR_02
    8. 6.8  FCC_ERR_01
    9. 6.9  FLASH_ERR_03
    10. 6.10 FLASH_ERR_04
    11. 6.11 FLASH_ERR_05
    12. 6.12 FLASH_ERR_08
    13. 6.13 FLASH_ERR_09
    14. 6.14 GPIO_ERR_05
    15. 6.15 GPIO_ERR_06
    16. 6.16 I2C_ERR_04
    17. 6.17 I2C_ERR_05
    18. 6.18 I2C_ERR_06
    19. 6.19 I2C_ERR_07
    20. 6.20 I2C_ERR_08
    21. 6.21 I2C_ERR_09
    22. 6.22 I2C_ERR_10
    23. 6.23 I2C_ERR_13
    24. 6.24 I2C_ERR_15
    25. 6.25 KEYSTORE_ERR_01
    26. 6.26 PMCU_ERR_10
    27. 6.27 PMCU_ERR_12
    28. 6.28 PMCU_ERR_14
    29. 6.29 RST_ERR_01
    30. 6.30 RST_ERR_02
    31. 6.31 SPI_ERR_02
    32. 6.32 SPI_ERR_04
    33. 6.33 SPI_ERR_05
    34. 6.34 SPI_ERR_06
    35. 6.35 SPI_ERR_07
    36. 6.36 SPI_ERR_10
    37. 6.37 SYSCTL_ERR_01
    38. 6.38 SYSCTL_ERR_02
    39. 6.39 SYSCTL_ERR_03
    40. 6.40 SYSCTL_ERR_04
    41. 6.41 SYSCTL_ERR_05
    42. 6.42 SYSCTL_ERR_06
    43. 6.43 SYSCTL_ERR_10
    44. 6.44 SYSOSC_ERR_01
    45. 6.45 SYSOSC_ERR_02
    46. 6.46 SYSOSC_ERR_04
    47. 6.47 SYSOSC_ERR_05
    48. 6.48 TIMER_ERR_04
    49. 6.49 TIMER_ERR_06
    50. 6.50 TIMER_ERR_07
    51. 6.51 UART_ERR_01
    52. 6.52 UART_ERR_02
    53. 6.53 UART_ERR_04
    54. 6.54 UART_ERR_05
    55. 6.55 UART_ERR_06
    56. 6.56 UART_ERR_07
    57. 6.57 UART_ERR_08
    58. 6.58 UART_ERR_10
    59. 6.59 UART_ERR_11
  10. 7Revision History

6.39 SYSCTL_ERR_03

SYSCTL Module

Category

Functional

Function

DEDERRADDR persists after a SYSRESET or a write to the SYSSTATUSCLR

Details

DEDERRADDR persists after either a SYSRESET or a write to the SYSSTATUSCLR register. Its value is overwritten only when a new FLASHDED error occurs. This behavior contradicts the Technical Reference Manual (TRM), which specifies its initial reset value as zero.

Workaround

No workaround