SLLU369 july   2023 ISO6521

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Pin Configuration of the ISO6521 Device
    2. 2.2 EVM Board Block Diagram and Image
    3. 2.3 EVM Setup and Operation
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1.     Trademarks

3.3 Bill of Materials

Table 4-1 shows the bill of materials (BOM) for this EVM.

Table 3-1 Bill of Materials
ItemDesignatorDescriptionManufacturerPart NumberQuantity
1 C2, C5 CAP, CERM, 1 uF, 25 V, +/- 10%, X5R, 0402MuRata GRM155R61E105KA12D2
2 C3, C6 CAP, CERM, 0.1 uF, 25 V, +/- 10%, X7R, 0402MuRata GRM155R71E104KE14D2
3 H1, H2, H3, H4 Bumpon, Hemisphere, 0.44 X 0.20, Clear 3M SJ-5303 (CLEAR)4
5J1, J2 Header, 2.54mm, 4x2, Gold, SMT FCI 95278-801A08LF2
6TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8Test Point, Miniature, SMTKeystone50198
7U1 General Purpose Dual-Channel Functional IsolatorsTexas InstrumentsISO6521REU1
8 C1, C4 CAP, CERM, 10 uF, 35 V, +/- 10%, X5R, 0805 MuRata GRM21BR6YA106KE43L 0