3.4 What is the procedure to change between 4- and 8-byte ISO/IEC 15693 blocks?
This change can be made in the System tab of the RF430FRL152HEVM GUI. For more information, see the section on changing firmware system settings in the RF430FRL152HEVM user's guide.
- Read the current settings by clicking the Read button in the System tab.
- Select the option for 4 or 8 bytes.
- Click the Write button.
The GUI requires the 8 block option to work. If the 4 block option is configured, the GUI prompts to change to the supported option.