SLOU575B November   2024  – December 2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 I2C Device Addresses
    2. 2.2 Header and Jumper Information
    3. 2.3 Test Points
  9. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials
  10. 4Additional Information
    1. 4.1 Trademarks
  11. 5Revision History

2.1 Setup

Software Control Mode

  1. Connect speakers to TAS5802PWPEVM.
  2. Connect a PSU to the TAS5802PWPEVM and turn on the power.
  3. Plug in a USB cable from the PC to the TAS5802PWPEVM. The USB READY LED (Blue) is also illuminated.
  4. If an optical source is used, then he blue SPDIF LOCK LED is illuminated.

  5. Initialize the TAS5802PWP device using PPC3 to begin playing audio and testing the different features.