SLUUCT5 October   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Hardware Description
      1. 2.2.1 I/O Description
  9. 3Implementation Results
    1. 3.1 Electrical Specifications
    2. 3.2 Test Summary
      1. 3.2.1 Definitions
      2. 3.2.2 Equipment
        1. 3.2.2.1 Power Supply
        2. 3.2.2.2 Function Generator
        3. 3.2.2.3 DMM
        4. 3.2.2.4 Oscilloscope
      3. 3.2.3 Equipment Setup
        1. 3.2.3.1 DC Power Supply Settings
        2. 3.2.3.2 Digital Multi-Meter Settings
        3. 3.2.3.3 Two-Channel Function Generator Settings
        4. 3.2.3.4 29
        5. 3.2.3.5 Oscilloscope Settings
        6. 3.2.3.6 Bench Setup Diagram
    3. 3.3 Power Up and Power Down Procedure
      1. 3.3.1 Power Up
      2. 3.3.2 Power Down
    4. 3.4 Typical Performance Waveforms (CL = 1800 pF)
      1. 3.4.1 Propagation Delays
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks

2.2.1 I/O Description

Table 3-1 details the connection descriptions.

Table 2-1 Connection Descriptions
PinsDescription
VCCVCC positive input test point. Powers IC VDD pin, use 4.5-V to 18-V range
VDDVDD positive input of UCC27332-Q1 IC
GNDMultiple test points. VCC negative input, IN, EN, OUT and Gate ground reference, and ground at UCC27332-Q1 IC
IN_ININ PWM signal
EN_INEN PWM signal
ININ input pin
ENEN input pin
GateOUT output at capacitive load
OUTOUT output at driver's pin