SLVS752D November   2007  – April 2026 TPS5420-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information 
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Oscillator Frequency
      2. 6.3.2  Voltage Reference
      3. 6.3.3  Enable (ENA) and Internal Slow Start
      4. 6.3.4  Undervoltage Lockout (UVLO)
      5. 6.3.5  Boost Capacitor (BOOT)
      6. 6.3.6  Output Feedback (VSENSE)
      7. 6.3.7  Internal Compensation
      8. 6.3.8  Voltage Feed Forward
      9. 6.3.9  Pulse-Width-Modulation (PWM) Control
      10. 6.3.10 Overcurrent Limiting
      11. 6.3.11 Overvoltage Protection (OVP)
      12. 6.3.12 Thermal Shutdown
    4. 6.4 Device Functional Modes
      1. 6.4.1 Minimum Input Voltage
      2. 6.4.2 ENA Control
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Application Circuits
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
          1. 7.2.1.2.1  Custom Design With WEBENCH® Tools
          2. 7.2.1.2.2  Switching Frequency
          3. 7.2.1.2.3  Input Capacitors
          4. 7.2.1.2.4  Output Filter Components
            1. 7.2.1.2.4.1 Inductor Selection
            2. 7.2.1.2.4.2 Capacitor Selection
            3.         44
            4.         45
          5. 7.2.1.2.5  Output Voltage Setpoint
          6. 7.2.1.2.6  Boot Capacitor
          7. 7.2.1.2.7  Catch Diode
          8. 7.2.1.2.8  Output Filter Component Selection
          9. 7.2.1.2.9  External Compensation Network
          10. 7.2.1.2.10 Advanced Information
            1. 7.2.1.2.10.1 Output Voltage Limitations
            2. 7.2.1.2.10.2 Internal Compensation Network
            3. 7.2.1.2.10.3 Thermal Calculations
        3. 7.2.1.3 Application Curves
      2. 7.2.2 Additional Circuits
      3. 7.2.3 Circuit Using Ceramic Output Filter Capacitors
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 PCB Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Development Support
        1. 8.1.1.1 Custom Design With WEBENCH® Tools
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

6.4.1 Minimum Input Voltage

TI recommends the TPS5420-Q1 to operate with input voltages above 5.5V. The typical VIN UVLO threshold is 5.3V, and the device can operate at input voltages down to the UVLO voltage. At input voltages below the actual UVLO voltage the device do not switch. If ENA is floating or externally pulled up to greater up than 1.3V, when V(VIN) passes the UVLO threshold the TPS5420-Q1 becomes active. Switching is enabled and the slow-start sequence is initiated. The TPS5420-Q1 starts linearly ramping up the internal reference voltage from 0V to the final value over the internal slow-start time period.