SLVS752D November   2007  – April 2026 TPS5420-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information 
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Oscillator Frequency
      2. 6.3.2  Voltage Reference
      3. 6.3.3  Enable (ENA) and Internal Slow Start
      4. 6.3.4  Undervoltage Lockout (UVLO)
      5. 6.3.5  Boost Capacitor (BOOT)
      6. 6.3.6  Output Feedback (VSENSE)
      7. 6.3.7  Internal Compensation
      8. 6.3.8  Voltage Feed Forward
      9. 6.3.9  Pulse-Width-Modulation (PWM) Control
      10. 6.3.10 Overcurrent Limiting
      11. 6.3.11 Overvoltage Protection (OVP)
      12. 6.3.12 Thermal Shutdown
    4. 6.4 Device Functional Modes
      1. 6.4.1 Minimum Input Voltage
      2. 6.4.2 ENA Control
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Application Circuits
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
          1. 7.2.1.2.1  Custom Design With WEBENCH® Tools
          2. 7.2.1.2.2  Switching Frequency
          3. 7.2.1.2.3  Input Capacitors
          4. 7.2.1.2.4  Output Filter Components
            1. 7.2.1.2.4.1 Inductor Selection
            2. 7.2.1.2.4.2 Capacitor Selection
            3.         44
            4.         45
          5. 7.2.1.2.5  Output Voltage Setpoint
          6. 7.2.1.2.6  Boot Capacitor
          7. 7.2.1.2.7  Catch Diode
          8. 7.2.1.2.8  Output Filter Component Selection
          9. 7.2.1.2.9  External Compensation Network
          10. 7.2.1.2.10 Advanced Information
            1. 7.2.1.2.10.1 Output Voltage Limitations
            2. 7.2.1.2.10.2 Internal Compensation Network
            3. 7.2.1.2.10.3 Thermal Calculations
        3. 7.2.1.3 Application Curves
      2. 7.2.2 Additional Circuits
      3. 7.2.3 Circuit Using Ceramic Output Filter Capacitors
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 PCB Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Development Support
        1. 8.1.1.1 Custom Design With WEBENCH® Tools
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

7.1 Application Information

The TPS5420-Q1 is a 2A, step-down regulator with an integrated high-side MOSFET. This device is typically used to convert a higher DC voltage to a lower DC voltage with a maximum available output current of 2A. Example applications are: high density point-of-load regulators for set-top box, high power LED supply, and other distributed power systems. Use the following design procedure to select component values for the TPS5420-Q1. This procedure illustrates the design of a high frequency switching regulator. Alternatively, use the WEBENCH circuit design and selection simulation services software to generate a complete design. The WEBENCH circuit design and selection simulation services software uses an iterative design procedure and accesses a comprehensive database of components when generating a design.