SLVUA82B November   2014  – June 2021 TPS62134A , TPS62134B , TPS62134C , TPS62134D

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modifications
      1. 1.2.1 Input and Output Capacitors
      2. 1.2.2 Loop Response Measurement
  3. 2Setup
    1. 2.1 Input/Output Connector Descriptions
    2. 2.2 Setup
  4. 3TPS62134xEVM-595 Test Results
  5. 4Board Layout
  6. 5Schematic and Bill of Materials
    1. 5.1 Schematic
    2. 5.2 Bill of Materials
  7. 6Revision History

2.2 Setup

To operate the EVM, set jumpers JP1 through JP5 to the desired positions per Section 2.1. Connect the input supply to J1 and J3 and connect the load to J4 and J6. Connect a second input supply to J9.