SLVUBW6A May   2020  – December 2020 TPS61288

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modification
  3. 2Connector, Test Point and Jumper Descriptions
    1. 2.1 Connector and Test Point Descriptions
    2. 2.2 Jumper Configuration
      1.      JP1 (VIN Control)
      2. 2.2.1 JP2 (Enable)
  4. 3Schematic, Bill of Materials, and Board Layout
    1. 3.1 Schematic
    2. 3.2 Bill of Materials
    3. 3.3 Board Layout
  5. 4Revision History

JP1 (VIN Control)

The JP1 jumper connects the control VIN with power VIN. By default, this jumper is set to the ON position. Take off the jumper for a user-defined voltage.