SLVUCT9 January   2024

 

  1.   1
  2.   Description
  3.   Features
  4.   Trademarks
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
      1. 1.3.1 Alternate Board Configurations
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Important Usage Notes
    3. 2.3 Connector Descriptions
  7. 3Implementation Results
    1. 3.1 Default Configuration Results
    2. 3.2 Sequence UP and DOWN Thresholds
    3. 3.3 Delay Timer
    4. 3.4 Regulation Timer
    5. 3.5 Disabled Channels
    6. 3.6 Externally Induced System RESET
  8. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  9. 5Compliance Information
    1. 5.1 Compliance and Certifications
  10. 6Additional Information
    1. 6.1 Known Hardware Issues
  11. 7Related Documentation
  12. 8Revision History

3.2 Sequence UP and DOWN Thresholds

VIN>10.2V initiates sequence UP. EN1 goes HIGH after DLY_TMR (12.35ms) expires.

GUID-2F78383F-D8F6-48C6-91A5-65B64F9045A9-low.pngFigure 3-1 VIN Rising, Initiate Sequence UP

VIN<6V initiates sequence DOWN. EN2 goes LOW after DLY_TMR (12.35ms) expires.

GUID-41476578-DF99-42D5-84E6-066CC633C89C-low.pngFigure 3-2 VIN Falling, Initiate Sequence DOWN