SLVUCU9A November   2023  – January 2026

 

  1.   1
  2.   Description
  3.   3
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Header Information
    3. 2.3 Jumper Information
    4. 2.4 Test Points
  9. 3Implementation Results
    1. 3.1 Evaluation Setup
    2. 3.2 Performance Data and Results
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Revision History

Jumper Information

Uni-OCP no CSA

NameDescription
J20

Select for banana jack/wire input to connect to LDO (position 1-2) or directly to device (position 2-3)

J26

Pull chip enable (CE) high to VDDP

J25Pull enable (EN) high to VDDP

Bi-OCP no CSA

NameDescription
J7

Select for banana jack/wire input to connect to LDO (position 1-2) or directly to device (position 2-3)

J16

Pull chip enable (CE) high to VDDP

J14Pull enable (EN) high to VDDP

Uni-OCP with CSA

NameDescription
J28

Select for banana jack/wire input to connect to LDO (position 1-2) or directly to device (position 2-3)

J30

Pull chip enable (CE) high to VDDP

J29Pull enable (EN) high to VDDP

DESAT

NameDescription
J5

Select for banana jack/wire input to connect to LDO (position 1-2) or directly to device (position 2-3)

J8

Pull chip enable (CE) high to VDDP

J6Pull enable (EN) high to VDDP