SLVUDJ1 January   2026

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
      1. 1.4.1 TPS7N59
      2. 1.4.2 LMG1020 Low Side Driver
  6. 2Hardware
    1. 2.1 EVM Setup
      1. 2.1.1 LDO Input/Output Connector Descriptions
        1. 2.1.1.1 VIN and GND
        2. 2.1.1.2 BIAS and GND
        3. 2.1.1.3 VOUT and GND
        4. 2.1.1.4 EN
      2. 2.1.2 Optional Load Transient Input/Output Connector Descriptions
        1. 2.1.2.1 VDD and GND
        2. 2.1.2.2 J12
        3. 2.1.2.3 J14
        4. 2.1.2.4 J16
        5. 2.1.2.5 J13
        6. 2.1.2.6 J17
      3. 2.1.3 TPS7N59 LDO Operation
      4. 2.1.4 Optional Load Transient Circuit Operation
      5. 2.1.5 Inputs/Outputs Connectors and Jumper Descriptions
        1. 2.1.5.1 J20, J22 – IN
        2. 2.1.5.2 J8 – OUT
        3. 2.1.5.3 TP1 – REF
        4. 2.1.5.4 TP2 – PG
        5. 2.1.5.5 TP3 – NR/SS
        6. 2.1.5.6 TP4, TP5, TP6 – GND
      6. 2.1.6 Soldering Guidelines
      7. 2.1.7 Equipment Connections
  7. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials (BOM)

Description

The TPS7N59EVM-184 evaluation module (EVM) is a reference design for engineering demonstration and evaluation of the TPS7N59, an ultra-low noise, ultra-high PSRR, 10A capable, RF low-dropout (LDO) linear regulator. Included in this user's guide are setup and operating instructions, thermal and layout guidelines, a printed circuit board (PCB) layout, a schematic diagram, and a bill of materials (BOM).