SLVUDL8 February   2026

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Pin Configuration of the ISOW308x Isolated RS-485/RS-422 Transceiver With Integrated DC-DC Converter Evaluation Module
    2. 2.2 EVM Setup and Operation
      1. 2.2.1 EVM Setup
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout and 3D Diagram
    3. 3.3 Bill of Materials (BOM)
  8. 4Additional Information
    1. 4.1 Trademarks

3.2 PCB Layout and 3D Diagram

Figure 3-2 and Figure 3-3 show the printed-circuit board (PCB) layout top and bottom layers, respectively. Figure 3-4 and Figure 3-5 shows a 3D diagram of the PCB indicating how a finished board looks like.

ISOW3080 ISOW3080DWEEVM PCB Layout - Top Figure 3-2 ISOW3080DWEEVM PCB Layout - Top
ISOW3080 ISOW3080DWEEVM PCB Layout - Bottom Figure 3-3 ISOW3080DWEEVM PCB Layout - Bottom
ISOW3080 ISOW3080DWEEVM PCB 3D View - Top Figure 3-4 ISOW3080DWEEVM PCB 3D View - Top
ISOW3080 ISOW3080DWEEVM PCB 3D View - Bottom Figure 3-5 ISOW3080DWEEVM PCB 3D View - Bottom