SLVUDX0A August   2026  – October 2026

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 General Configurations
      1. 2.1.1 Physical Access
      2. 2.1.2 Test Equipment and Setup
  8. 3Implementation Results
    1. 3.1 Test Setup and Procedures
      1. 3.1.1 Input Hotplug Test
      2. 3.1.2 Power Up Into Short
      3. 3.1.3 Reverse-Current Blocking Test
      4. 3.1.4 Overvoltage Lockout
      5. 3.1.5 IMON Pin Test
      6. 3.1.6 Output Hot Short
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Drawings
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks
  11. 6Revision History

Features

  • Overvoltage protection
  • Active High Enable with adjustable UVLO threshold
  • Adjustable analog current monitor and output voltage slew rate control using onboard jumpers
  • Schottky diode for output transient protections
  • LED status for fault indications
  • Short circuit protection during startup and steady state
  • LM7320 and LM7330 offers integrated internal smart TVS diode
  • Linear ORing based Reverse Current Blocking