SNAU249A December   2019  – December 2020 LMK1C1104

 

  1.   Trademarks
  2. 1Features
  3. 2Signal Path and Control Circuitry
  4. 3Getting Started
  5. 4Power-Supply Connections
  6. 5Enabling/Disabling the Outputs
  7. 6Output Clock
  8. 7Bill of Materials
    1. 7.1 REACH Compliance
  9. 8Schematic
  10. 9Revision History

4 Power-Supply Connections

Connect the power-supply source and ground to the terminal block labeled J1 as shown in Figure 4-1. Alternatively, connect the power-supply source to TP1, and connect the ground of the power-supply TP2. Decoupling capacitors and a ferrite bead isolate the EVM power from the LMK1C1104 device power pins.

GUID-20201121-CA0I-RPJG-SSXB-5XFJQKJTWVQR-low.svg Figure 4-1 Power Supply Connection Locations.

The LMK1C1104EVM operates from a single 3.3-V / 2.5-V / 1.8-V supply.