SNOK010 November 2024 TPS7H6005-SEP , TPS7H6015-SEP , TPS7H6025-SEP
- 1
- Abstract
- Trademarks
- 1 Introduction
- 2 Single-Event Effects (SEE)
- 3 Device and Test Board Information
- 4 Irradiation Facility and Setup
- 5 Depth, Range, and LETEFF Calculation
- 6 Test Setup and Procedures
- 7 Destructive Single-Event Effects (DSEE)
- 8 Single-Event Transients (SET)
- 9 Event Rate Calculations
- 10Summary
- A References
3 Device and Test Board Information
The TPS7H60x5-SEP is packaged in a 56-pin plastic package as shown in Figure 3-1. A TPS7H60x5-SEP evaluation board made specifically for radiation testing was used to evaluate the performance and characteristics of the TPS7H60x5-SEP under heavy ion radiation. The TPS7H60x5-SEP evaluation board is shown in Figure 3-2. The board schematic is shown in Figure 3-3.
The package was delidded to reveal the die face for all heavy-ion testing.
Figure 3-1 Photograph of Delidded TPS7H6005-SEP (Left) and Pinout Diagram (Right)
Figure 3-2 TPS7H60x5-SEP EVM Top View
Figure 3-3 TPS7H60x5-SEP Evaluation Board Schematics