SNOK014 December   2024 TPS7H6005-SEP

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Device Information
    1. 1.1 Product Description
    2. 1.2 Device Details
  5. 2Total Dose Test Setup
    1. 2.1 Test Overview
    2. 2.2 Test Description and Facilities
    3. 2.3 Test Setup Details
      1. 2.3.1 Unbiased
      2. 2.3.2 Biased
    4. 2.4 Test Configuration and Conditions
  6. 3TID Characterization Test Results
    1. 3.1 TID Characterization Results Summary
    2. 3.2 Data Sheet Electrical Parameters
  7. 4Applicable and Reference Documents
    1. 4.1 Applicable Documents
    2. 4.2 Reference Documents
  8.   A Appendix: HDR TID Report

2.3.2 Biased

Table 2-1 DUT Power Supply Bias and Vout Measurements
Power Supply Bias
Edge ConnectorBUSTypicalComments
Power SupplyBUS AVIN14VDC14VDC - Fixed power supply
BUS DBOOT14VDC14VDCWRTSW - Floating power supply WRT to SW
BUS BASW150VIncrease HV gradually. Recommend using safety interlock HV protection when working with high voltage.
DUT Vout Measurements
VOUT Test PointsTP_PGOODON5VLS is ON
TP_LOPWM_LI1.8VPWM mode
TP_HOPWM_LI DC WRT ASW3.51VPWM mode
TP_SWSW = PSW = ASW150VSW = PSW = ASW
PWM_LIDUT Mon1.85VDUT monitor edge connector
TPS7H6005-SEP HDR TID HardwareFigure 2-1 HDR TID Hardware
TPS7H6005-SEP Supplies and GND HDR TID Bias DiagramFigure 2-2 Supplies and GND HDR TID Bias Diagram
TPS7H6005-SEP HDR TID Bias Diagram Figure 2-3 HDR TID Bias Diagram