TIDUEU0A June   2020  – October 2020

 

  1.   Description
  2.   Resources
  3.   Features
  4.   Applications
  5.   5
  6. 1System Description
    1. 1.1 Key System Specifications
  7. 2System Overview
    1. 2.1 Block Diagram
    2. 2.2 Design Considerations
    3. 2.3 Power Considerations
    4. 2.4 Highlighted Products
      1. 2.4.1 Processor
      2. 2.4.2 Power Supply
      3. 2.4.3 Display
      4. 2.4.4 FPDLink Serializer
      5. 2.4.5 Input/Cameras
      6. 2.4.6 Ethernet
      7. 2.4.7 CAN
      8. 2.4.8 Class-D Amplifier
      9. 2.4.9 Other Products
        1. 2.4.9.1 Radio Tuner
        2. 2.4.9.2 Bluetooth/WiFi
        3. 2.4.9.3 GPS/GNSS
        4. 2.4.9.4 Memory
  8. 3Hardware, Software, Testing Requirements, and Test Results
    1. 3.1 Required Hardware and Software
      1. 3.1.1 Hardware
      2. 3.1.2 Software
    2. 3.2 Testing and Results
      1. 3.2.1 Test Setup
      2. 3.2.2 Test Results
  9. 4Design Files
    1. 4.1 Schematics
    2. 4.2 Bill of Materials
    3. 4.3 PCB Layout Recommendations
    4. 4.4 Gerber Files
    5. 4.5 Assembly Drawings
  10. 5Related Documentation
    1. 5.1 Trademarks
  11.   Revision History

3.2.2 Test Results

The following tests were run on board.

Table 3-1 Test Results
SYSTEMSPECIFICATIONS
PowerValidated. Powers up drawing about 250mA@12V and runs up to 1.2A@12V when tests are running.
CCS connectValidated
Boot Mode SettingsValidated
UART ConsolesValidated
DDRLPDDR4 at 3733 MT/s validated
eMMCValidated
OSPIValidated
SDCARDValidated
I2CValidated with PMIC, ID-EEPROM, UB941, TAS6304, TAS2505
GPIOValidated
LEDsValidated