Support software
ADS1282-C-EXAMPLE-CODE — ADS1282 example C code
Expedite your embedded design using this example C code for the ADS1282
ADS1282-HT
High-temperature ultra-high-resolution delta-sigma ADC with PGA for seismic and energy exploration
Data sheet
ADS1282-HT
- High Resolution: 124-dB SNR (1000 SPS)
- High Accuracy: THD: –102 dB
INL: 0.5 ppm - Low-Noise PGA
- Two-Channel Input MUX
- Inherently-Stable Modulator With Fast Responding
Over-Range Detection - Flexible Digital Filter:
- Sinc + FIR + IIR (Selectable)
- Linear or Minimum Phase Response
- Programmable High-Pass Filter
- Selectable FIR Data Rates: 250 SPS to 4
kSPS
- Filter Bypass Option
- Low-Power Consumption: 25 mW (210°C)
- Offset and Gain Calibration Engine
- SYNC Input
- Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
- Digital Supply: 1.75 to 3.3 V
- Supports Extreme Temperature Applications(1)
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Extreme (–55°C to 210°C)
Temperature Range - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
The ADS1282-HT device is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). The ADS1282-HT device is suitable for the demanding needs of energy exploration and seismic monitoring environments.
The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.
The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.
The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.
The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.
Two operating modes allow optimization of noise and power. Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 210°C or from –55°C to 175°C for the PW package.
Technical documentation
No results found. Please clear your search and try again.
View all 3 | Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | ADS1282-HT High-Temperature High-Resolution Delta Sigma ADC datasheet (Rev. H) | PDF | HTML | 24 Feb 2016 |
| * | Radiation & reliability report | ADS1282HPW Reliability Report (Rev. A) | 17 Aug 2012 | |
| * | Radiation & reliability report | ADS1282SJDJ Reliability Report | 07 May 2012 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Calculation tool
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Supported products & hardware
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| CDIP_SB (JDJ) | 28 | Ultra Librarian |
| DIESALE (KGD) | — | |
| TSSOP (PW) | 28 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.