Top

Product details

Parameters

Common mode voltage (Max) (V) 26 Common mode voltage (Min) (V) -0.2 Input offset (+/-) (Max) (uV) 150 Input offset drift (+/-) (Typ) (uV/C) 0.2 Gain (V/V) 100, 20, 200, 50 Gain error (%) 1 Gain error drift (+/-) (Max) (ppm/°C) 20 CMRR (Min) (dB) 84 Bandwidth (kHz) 350, 210, 150, 105 Supply voltage (Max) (V) 5.5 Supply voltage (Min) (V) 2.7 Iq (Max) (mA) 0.5 Number of channels (#) 2 Comparators (#) 0 Features Dual channel, Low-side Capable Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (C) -40 to 125 open-in-new Find other Current sense amplifiers analog output

Package | Pins | Size

VSSOP (DGK) 8 15 mm² 3 x 4.9 open-in-new Find other Current sense amplifiers analog output

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • Functional Safety-Capable
  • Common-mode range (VCM): –0.2 V to +26 V
  • High bandwidth: 350 kHz (A1 devices)
  • Offset voltage:
    • ±150 µV (maximum) at VCM = 0 V
    • ±500 µV (maximum) at VCM = 12 V
  • Output slew rate: 2 V/µs
  • Accuracy:
    • ±1% gain error (maximum)
    • 1-µV/°C offset drift (maximum)
  • Gain options:
    • 20 V/V (A1 devices)
    • 50 V/V (A2 devices)
    • 100 V/V (A3 devices)
    • 200 V/V (A4 devices)
  • Quiescent current: 260 µA maximum (INA180-Q1)

All trademarks are the property of their respective owners.

open-in-new Find other Current sense amplifiers analog output

Description

The INA180-Q1, INA2180-Q1, and INA4180-Q1 (INAx180-Q1) current sense amplifiers are designed for cost-optimized applications. These devices are part of a family of current-sense amplifiers (also called current-shunt monitors) that sense voltage drops across current-sense resistors at common-mode voltages from –0.2 V to +26 V, independent of the supply voltage. The INAx180-Q1 integrate a matched resistor gain network in four, fixed-gain device options: 20 V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain resistor network minimizes gain error and reduces the temperature drift.

All these devices operate from a single 2.7-V to 5.5-V power supply. The single-channel INA180-Q1 draws a maximum supply current of 260 µA; whereas, the dual-channel INA2180-Q1 draws a maximum supply current of 500 µA, and the quad channel draws a maximum supply current of 900 µA.

The INA180-Q1 is available in a 5-pin, SOT-23 package with two different pin configurations. The INA2180-Q1 is available in a 8-pin, VSSOP package. The INA4180-Q1 is available in a 14-pin, TSSOP package. All device options are specified over the extended operating temperature range of –40°C to +125°C.

open-in-new Find other Current sense amplifiers analog output
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 10
Type Title Date
* Datasheet INAx180-Q1 Automotive, Low- and High-Side Voltage Output, Current-Sense Amplifiers datasheet (Rev. C) Apr. 30, 2020
Technical articles How current-sense amplifiers monitor satellite health Feb. 08, 2021
Functional safety information INAx180-Q1, INAx181-Q1 Functional Safety Fit Rate, FMD and Pin FMA (Rev. A) Sep. 22, 2020
Technical articles A key to accurate system thermal management: monitoring both current flow and temperature Oct. 04, 2018
Selection guide Current Sense Amplifiers (Rev. D) Apr. 04, 2018
Application note Common Uses for Multichannel Current Monitoring Dec. 19, 2017
Application note Closed-Loop Analysis of Load-Induced Amplifier Stability Issues Using Zout Oct. 27, 2017
Technical articles System trade-offs for high- and low-side current measurements Jun. 01, 2017
Application note Low-Side Current Sense Circuit Integration Mar. 30, 2017
Technical articles Why should you care about overcurrent protection in your system? Jun. 16, 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
29
Description
The INA2180 is an integrated current sense monitor solution that provides ease of use and high performance for cost-sensitive applications. The INA2181 shares the same capabilities with the support for bidirectional current measurements. The INA2180-2181EVM is intended to provide basic functional (...)
Features
  • Evaluation of the INA2180x and INA2181x in all gain options
  • Test points to allow ease of acess to device pins
  • Capability to evaluate both high and low-side configurations

Design tools & simulation

SIMULATION MODEL Download
SBOMAD0A.ZIP (119 KB) - PSpice Model
SIMULATION MODEL Download
SBOMAD1A.TSC (2797 KB) - TINA-TI Reference Design
SIMULATION MODEL Download
SBOMAD2A.ZIP (37 KB) - TINA-TI Spice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOL Download
SBOR020A.ZIP (525 KB)

Reference designs

REFERENCE DESIGNS Download
Current Shunt Monitor with Transient Robustness Reference Design
TIDA-00302 This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.

Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)

document-generic Schematic document-generic User guide
Design files

CAD/CAE symbols

Package Pins Download
VSSOP (DGK) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos