NEW

TLV4825

ACTIVE

Quad 5.5V, 3MHz, zero-drift CMOS precision operational amplifier

Order now

Data sheet

document-pdfAcrobat TLVx825 3.5MHz, 1.8V to 5.5V, High Precision, Zero-Drift Operational Amplifiers datasheet (Rev. C) PDF | HTML

TLV4825

ACTIVE

Data sheet

Order now

Product details

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Vos (offset voltage at 25°C) (max) (mV)

0.004

Offset drift (typ) (µV/°C)

0.02

GBW (typ) (MHz)

3.5

Features

Cost Optimized, Zero Drift

Slew rate (typ) (V/µs)

1.8

Rail-to-rail

In-Out

Iq per channel (typ) (mA)

0.5

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.007

Output swing headroom (to positive supply) (typ) (V)

-0.007

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Vos (offset voltage at 25°C) (max) (mV)

0.004

Offset drift (typ) (µV/°C)

0.02

GBW (typ) (MHz)

3.5

Features

Cost Optimized, Zero Drift

Slew rate (typ) (V/µs)

1.8

Rail-to-rail

In-Out

Iq per channel (typ) (mA)

0.5

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.007

Output swing headroom (to positive supply) (typ) (V)

-0.007

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Ultra-low offset drift: ±0.02µV/°C
Flat low frequency noise: 0.3µVPP (0.1 to 10Hz)
Ultra-low offset: ±4µV
Rail-to-rail input and output
Very high AOL, CMRR, PSRR: > 120dB
Wide input common-mode: 100mV beyond rails
Low input bias current: ±100pA
Low thermal noise floor: 15nV/√Hz
Wide gain bandwidth: 3.5MHz
High CL drive: 1nF (no sustained oscillations)
Low quiescent current: 500µA/channel
Wide supply range: 1.8V to 5.5V
Wide temperature range: –40°C to +125°C

Ultra-low offset drift: ±0.02µV/°C
Flat low frequency noise: 0.3µVPP (0.1 to 10Hz)
Ultra-low offset: ±4µV
Rail-to-rail input and output
Very high AOL, CMRR, PSRR: > 120dB
Wide input common-mode: 100mV beyond rails
Low input bias current: ±100pA
Low thermal noise floor: 15nV/√Hz
Wide gain bandwidth: 3.5MHz
High CL drive: 1nF (no sustained oscillations)
Low quiescent current: 500µA/channel
Wide supply range: 1.8V to 5.5V
Wide temperature range: –40°C to +125°C

The TLVx825 and family of single, dual, and quad channel operational amplifiers enable precision performance such as lower offset, lower offset drift over temperature, greater offset stability over time and a flat noise floor. This level of performance is crucial to a variety of systems focusing on precision voltage sensing from sensors and precision current sensing using smaller shunt resistors.

The TLVx825 uses zero-drift architecture to achieve an input referred offset voltage of 4µV, an offset drift of 0.02µV/°C and a low frequency noise of 320nVPP in the standard 0.1 – 10Hz range. This combination of specs provides excellent accuracy in high gain applications, thereby greatly reducing the need for system level calibration.

Additionally, with a quiescent current of 500µA, the TLVx825 is able to achieve a bandwidth of 3.5MHz and a broadband noise of 15nV/√Hz. This ability is crucial to achieve higher linearity, and signal-to-noise ratio in applications involving higher resolution, mid-speed analog to digital converters (ADCs) while minimizing system power.

The TLVx825 and family of single, dual, and quad channel operational amplifiers enable precision performance such as lower offset, lower offset drift over temperature, greater offset stability over time and a flat noise floor. This level of performance is crucial to a variety of systems focusing on precision voltage sensing from sensors and precision current sensing using smaller shunt resistors.

The TLVx825 uses zero-drift architecture to achieve an input referred offset voltage of 4µV, an offset drift of 0.02µV/°C and a low frequency noise of 320nVPP in the standard 0.1 – 10Hz range. This combination of specs provides excellent accuracy in high gain applications, thereby greatly reducing the need for system level calibration.

Additionally, with a quiescent current of 500µA, the TLVx825 is able to achieve a bandwidth of 3.5MHz and a broadband noise of 15nV/√Hz. This ability is crucial to achieve higher linearity, and signal-to-noise ratio in applications involving higher resolution, mid-speed analog to digital converters (ADCs) while minimizing system power.

filter

Find other Precision op amps (Vos<1mV)

Download View video with transcript Video

Technical documentation

No results found. Please clear your search and try again.

View all 2

Top documentation	Type	Title	Format options	Date
*	Data sheet	TLVx825 3.5MHz, 1.8V to 5.5V, High Precision, Zero-Drift Operational Amplifiers datasheet (Rev. C)	PDF \| HTML	Nov 11, 2026
	Technical article	Enabling precision amplifier performance for every design (Rev. A)	PDF \| HTML	Aug 13, 2026

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

AMP-PDK-EVM — Amplifier performance development kit evaluation module

The amplifier performance development kit (PDK) is an evaluation module (EVM) kit to test common operational amplifier (op amp) parameters and is compatible with most op amps and comparators. The EVM kit offers a main board with several socketed daughtercard options to fit package needs, allowing (...)

User guide: PDF | HTML

Supported products & hardware

View options

Simulation model