36-pin (YZR) package image

LM49155TL/NOPB 활성

업링크 노이즈 억제 및 다운링크 SNR 향상 아날로그 오디오 하위 시스템

활성 custom-reels 맞춤형 맞춤형 수량의 릴을 구매할 수 있음

가격

수량 가격
+

품질 정보

등급 Catalog
RoHS
REACH
납 마감/볼 재질 SNAGCU
MSL 등급/피크 리플로우 Level-1-260C-UNLIM
품질, 신뢰성
및 패키징 정보

포함된 정보:

  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
보기 또는 다운로드
추가 제조 정보

포함된 정보:

  • 팹 위치
  • 조립 위치
보기

수출 분류

*참조 목적

  • US ECCN: EAR99

패키징 정보

패키지 | 핀 DSBGA (YZR) | 36
작동 온도 범위(°C)
패키지 수량 | 캐리어 250 | SMALL T&R

LM49155의 주요 특징

  • Noise cancellation for uplink and downlink without DSP-type artifacts, distortions or delays
  • Adapting AGC on ambient noise level & downlink signal strength for earpiece
  • Downlink adjustable noise-reducing high pass filter
  • E 2S Class D Amplifier with ALC
  • Ground Referenced Headphone Outputs with Advanced Click Pop Suppression
  • Micro-power shutdown

  • LM49155에 대한 설명

    The LM49155 is a fully integrated audio subsystem designed for portable handheld applications such as cellular phones. The LM49155 combines a Noise Suppression microphone amplifier, a 1.35W mono class D amplifier with ALC, class AB earpiece driver with AGC, a high efficiency, stereo, ground referenced headphone amplifier with click pop suppression and I 2C modes select and volume control.

    The LM49155 features analog fully differential input, and differential output microphone amplifier designed to reduce background acoustic noise, while delivering superb speech clarity in voice communication applications. Downlink SNR enhancement with an advanced acoustic AGC technology to adjust output levels.

    The LM49155 speaker amplifier features National’s unique output limiter that provides both a no-clip feature and speaker protection. The E 2S class D amplifier features a patented, ultra low EMI PWM architecture that significantly reduces RF emissions while preserving audio quality and efficiency. The headphone drivers feature National’s ground referenced architecture that creates a ground-referenced output from a single, low-voltage supply.

    The LM49155 is available in an ultra-small 36-bump micro SMD package (3.434mm x 3.459mm x 0.6mm).

    Notice: This document is not a full datasheet. For more information regarding this product or to order samples please contact your local National Semiconductor sales office or visit http://www.national.com/support/dir.html


    Key Specifications

    Uplink Far Field Noise Suppression  Electrical FFNSE at f = 1kHz 34dB (typ)
    Downlink SNR Enhancement Earpiece Amplifier
      Near-Field SNR Enhancement  Downlink SNRIE 6 to 18dB (typ) 16dB (typ)
    Class D Loudspeaker Amplifier RL = 15μH+8Ω+15μH
     POUT, THD+N %, VDD = 5.0V 1.35W (typ)
    Headphone Amplifier RL = 32Ω
     POUT, THD+N %, HPVDD = 1.8V 19mW (typ)

    가격

    수량 가격
    +

    캐리어 옵션

    전체 릴, 맞춤형 수량의 릴, 절단 테이프, 튜브, 트레이 등 부품 수량에 따라 다양한 캐리어 옵션을 선택할 수 있습니다.

    맞춤형 릴은 한 릴에서 절단 테이프의 연속 길이로, 로트 및 날짜 코드 추적 기능을 유지하여 요청한 정확한 양을 유지합니다. 업계 표준에 따라, 황동 심으로 절단 테이프 양쪽에 18인치 리더와 트레일러를 연결하여 자동화 조립 기계에 직접 공급합니다. TI는 맞춤형 수량의 릴 주문 시 릴 요금을 부과합니다.

    절단 테이프란 릴에서 잘라낸 테이프 길이입니다. TI는 요청 수량을 맞추기 위해 여러 가닥의 절단 테이프 또는 박스를 사용하여 주문을 이행할 수 있습니다.

    TI는 종종 재고 가용성에 따라 튜브 또는 트레이 디바이스를 박스나 튜브 또는 트레이로 배송합니다. TI는 내부 정전 방전 및 습도 민감성 수준 보호 요구 사항에 따라 모든 테이프, 튜브 또는 샘플 박스를 포장합니다.

    자세히 보기

    로트 및 날짜 코드를 선택할 수 있습니다.

    장바구니에 수량을 추가하고 결제 프로세스를 시작하여 기존 재고에서 로트 또는 날짜 코드를 선택할 수 있는 옵션을 확인합니다.

    자세히 보기