48-pin (PT) package image

TLV320AIC22CPTR 활성

듀얼 VoIP 코덱

활성 custom-reels 맞춤형 맞춤형 수량의 릴을 구매할 수 있음

가격

수량 가격
+

추가 패키지 수량 | 캐리어 옵션 이 제품들은 정확히 동일하지만 다른 캐리어 유형으로 제공됩니다.

TLV320AIC22CPT 활성
패키지 수량 | 캐리어 250 | JEDEC TRAY (10+1)
재고
수량 | 가격 1ku | +

품질 정보

등급 Catalog
RoHS
REACH
납 마감/볼 재질 NIPDAU
MSL 등급/피크 리플로우 Level-4-260C-72HRS/Level-3-220C-168HRS
품질, 신뢰성
및 패키징 정보

포함된 정보:

  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
보기 또는 다운로드
추가 제조 정보

포함된 정보:

  • 팹 위치
  • 조립 위치
보기

수출 분류

*참조 목적

  • US ECCN: EAR99

패키징 정보

패키지 | 핀 LQFP (PT) | 48
작동 온도 범위(°C) -40 to 85
패키지 수량 | 캐리어 1,000 | LARGE T&R

TLV320AIC22C의 주요 특징

  • Two 16-Bit Analog-to-Digital Converters (ADCs)
  • Two 16-Bit Digital-to-Analog Converters (DACs)
  • Programmable Input/Output Gain
  • Analog Crosspoint to Connect the Two Coders/Decoders (Codecs) to Any of the I/O Ports –   Controlled Through the Serial Port or the Inter-Integrated Circuit (I2C) Bus
  • 8-Bit A-Law/µ-Law Companded Data or 16-Bit Linear Data Complying With G.711 Standard
  • Filters Comply With G.712 and G.722 Standards
  • Programmable Analog-to-Digital and Digital-to-Analog Conversion Rate
  • Typical 77-dB Signal-to-Noise + Distortion for ADC
  • Typical 78-dB Signal-to-Noise + Distortion for DAC
  • Supports 8- and 16-kHz Sampling Rates
  • Preamplifiers for Microphone, Handset, Headset, and Speakerphone Gain Selectable Via the Serial Port or I2C Bus
  • 2.5-V Microphone Bias Voltage
  • Seamless Interface to a Single Multichannel Buffered Serial Port (McBSP) of a C54x™ or a C6x Digital Signal Processor (DSP)
  • Four TLV320AIC22C ICs Can Be Cascaded Together to Allow up to Eight Channels
  • 2s-Complement Data Format
  • Differential Outputs
  • Typical Low Crosstalk < –85 dB
  • Hardware/Software Power Down
  • Independent Power Down for Drivers
  • Single 3.3-V Supply Operation
  • 204-mW Typical Power Consumption
  • Available in 48-Terminal Low-Profile Plastic Quad Flatpack (LQFP) Package

C54x and TMS320C54x are trademarks of Texas Instruments Incorporated.

TLV320AIC22C에 대한 설명

The TLV320AIC22C contains two coders/decoders (codecs) for voice applications, including voice over internet protocol (VoIP). It features two analog-to-digital converter (ADC) channels and two digital-to-analog converter (DAC) channels that can be connected to a handset, headset, speaker, microphone, or a subscriber line via an analog crosspoint.

The TLV320AIC22C has a flexible serial interface that allows the two channels of the TLV320AIC22C to be interfaced to a single multichannel buffered serial port (McBSP) of the external digital signal processor (DSP). The two channels share the digital interface at different time slots. Up to four TLV320AIC22C units can be cascaded together to obtain eight channels. For control purposes, either the serial interface or the inter-integrated circuit (I2C) interface can be used. Programmable-gain amplifiers (PGAs), preamp gain, microphone bias voltages, and analog crosspoint are programmed through the serial interface or the I2C interface. The TLV320AIC22C can be powered down, via a dedicated terminal or by using software control, to reduce power dissipation.

The TLV320AIC22C is available in a 48-terminal LQFP package and is characterized for operation from –40°C to 85°C.

가격

수량 가격
+

추가 패키지 수량 | 캐리어 옵션 이 제품들은 정확히 동일하지만 다른 캐리어 유형으로 제공됩니다.

TLV320AIC22CPT 활성
패키지 수량 | 캐리어 250 | JEDEC TRAY (10+1)
재고
수량 | 가격 1ku | +

캐리어 옵션

전체 릴, 맞춤형 수량의 릴, 절단 테이프, 튜브, 트레이 등 부품 수량에 따라 다양한 캐리어 옵션을 선택할 수 있습니다.

맞춤형 릴은 한 릴에서 절단 테이프의 연속 길이로, 로트 및 날짜 코드 추적 기능을 유지하여 요청한 정확한 양을 유지합니다. 업계 표준에 따라, 황동 심으로 절단 테이프 양쪽에 18인치 리더와 트레일러를 연결하여 자동화 조립 기계에 직접 공급합니다. TI는 맞춤형 수량의 릴 주문 시 릴 요금을 부과합니다.

절단 테이프란 릴에서 잘라낸 테이프 길이입니다. TI는 요청 수량을 맞추기 위해 여러 가닥의 절단 테이프 또는 박스를 사용하여 주문을 이행할 수 있습니다.

TI는 종종 재고 가용성에 따라 튜브 또는 트레이 디바이스를 박스나 튜브 또는 트레이로 배송합니다. TI는 내부 정전 방전 및 습도 민감성 수준 보호 요구 사항에 따라 모든 테이프, 튜브 또는 샘플 박스를 포장합니다.

자세히 보기

로트 및 날짜 코드를 선택할 수 있습니다.

장바구니에 수량을 추가하고 결제 프로세스를 시작하여 기존 재고에서 로트 또는 날짜 코드를 선택할 수 있는 옵션을 확인합니다.

자세히 보기