首頁 電池管理 IC 電池保護器
首頁
電池管理 IC
電池保護器

BQ77PL157A4225

現行

適用 3 至 6 芯鋰離子/聚合物電池的電壓保護

立即訂購
產品規格表

BQ77PL157A4225

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of series cells (max) 4, 5, 6 Number of series cells (min) 3, 4, 5, 6 Features FET drive, Overvoltage, Stackable Function Protection Operating current (typ) (µA) 2 Vin (max) (V) 30 Overvoltage protection 4.225 Operating temperature range (°C) -40 to 85 Battery overvoltage protection (min) (V) 4.225 Battery overvoltage protection (max) (V) 4.225
Rating Catalog Number of series cells (max) 4, 5, 6 Number of series cells (min) 3, 4, 5, 6 Features FET drive, Overvoltage, Stackable Function Protection Operating current (typ) (µA) 2 Vin (max) (V) 30 Overvoltage protection 4.225 Operating temperature range (°C) -40 to 85 Battery overvoltage protection (min) (V) 4.225 Battery overvoltage protection (max) (V) 4.225
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm)
  • Single IC Li-Ion Protection for 3-Series to 6-Series Cells
  • Stackable to Protect up to 18-Series Cells
  • Programmable Detection Time Delay
  • Low Power Consumption
    • Typical 2-µA to 2.5-µA Normal Mode
  • Fixed 4.225 V Overvoltage Threshold
  • Highly Accurate: ±20-mV MAX, TA = 0°C to 50°C
  • Output Activation for Low Side FET
    (Contact TI for Alternate Output Options: High/Low-side Fuse or FET)
  • Protected Output, Power, and Ground Pins for Added Safety and Reliability
  • Permanent or Recoverable Fault Options
  • 16-pin Small Outline Package
  • APPLICATIONS
    • Primary or Secondary Level Voltage Protection for Li-Ion Battery Packs for Use in:
      • Power Tools
      • UPS Systems
      • E-Bikes, Scooters, and Small Mobility Vehicles
      • Medical Devices, Test Equipment, and Industrial Products
    •
  • Single IC Li-Ion Protection for 3-Series to 6-Series Cells
  • Stackable to Protect up to 18-Series Cells
  • Programmable Detection Time Delay
  • Low Power Consumption
    • Typical 2-µA to 2.5-µA Normal Mode
  • Fixed 4.225 V Overvoltage Threshold
  • Highly Accurate: ±20-mV MAX, TA = 0°C to 50°C
  • Output Activation for Low Side FET
    (Contact TI for Alternate Output Options: High/Low-side Fuse or FET)
  • Protected Output, Power, and Ground Pins for Added Safety and Reliability
  • Permanent or Recoverable Fault Options
  • 16-pin Small Outline Package
  • APPLICATIONS
    • Primary or Secondary Level Voltage Protection for Li-Ion Battery Packs for Use in:
      • Power Tools
      • UPS Systems
      • E-Bikes, Scooters, and Small Mobility Vehicles
      • Medical Devices, Test Equipment, and Industrial Products
    •

    The bq77PL157 is a stackable overvoltage protection device for 3, 4, 5 or 6 series cell Li-Ion battery packs. This device incorporates a precise and accurate overvoltage detection circuit with preconfigured threshold limits. Additional features include the ability to stack multiple parts to monitor up to 18 series cells.

    FUNCTION

    Each series cell in a Li-Ion battery pack is compared to an internal reference voltage. If one cell reaches an overvoltage condition, the protection sequence begins. The bq77PL157 starts charging an external capacitor through the CD pin. When the CD pin voltage reaches 1.2 V, the OUT pin changes state and the LVO pin becomes active.

    If multiple bq77PL157 devices are stacked, the LVIN pin of the next-lower device receives the LVO pin from the above device and similarly starts a shortened delay timer before activating its OUT pin. (No additional isolation or level-shift circuitry is required.) The lowest bq77PL157 in the string is used to activate a power MOSFET located in the low side of the power path.

    The bq77PL157 is a stackable overvoltage protection device for 3, 4, 5 or 6 series cell Li-Ion battery packs. This device incorporates a precise and accurate overvoltage detection circuit with preconfigured threshold limits. Additional features include the ability to stack multiple parts to monitor up to 18 series cells.

    FUNCTION

    Each series cell in a Li-Ion battery pack is compared to an internal reference voltage. If one cell reaches an overvoltage condition, the protection sequence begins. The bq77PL157 starts charging an external capacitor through the CD pin. When the CD pin voltage reaches 1.2 V, the OUT pin changes state and the LVO pin becomes active.

    If multiple bq77PL157 devices are stacked, the LVIN pin of the next-lower device receives the LVO pin from the above device and similarly starts a shortened delay timer before activating its OUT pin. (No additional isolation or level-shift circuitry is required.) The lowest bq77PL157 in the string is used to activate a power MOSFET located in the low side of the power path.
    filter 尋找其它 電池保護器
    下載 觀看有字幕稿的影片 影片

    您可能會感興趣的類似產品

    open-in-new 比較替代產品
    功能相同，但針腳輸出與所比較的裝置不同。
    BQ7718 現行 具有內部延遲計時器的 2-5S 過電壓保護器 3-5S overvotlage protector with fixed OVP threshold and low power consumption

    技術文件

    找不到結果。請清除您的搜尋條件，然後再試一次。
    檢視所有 1
    重要文件 類型 標題 格式選項 下載最新的英文版本 日期
    * 資料表 Stackable Secondary Voltage Protector for 3 to 6 Series Li Cells. datasheet (Rev. B) 2012/4/13

    設計與開發

    如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

    封裝 針腳 CAD 符號、佔位空間與 3D 模型
    TSSOP (PW) 16 Ultra Librarian
    適用 TI 的評估品項標準條款與條件。

    訂購與品質

    支援與培訓

    內含 TI 工程師技術支援的 TI E2E™ 論壇

    以英文檢視所有論壇主題

    內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

    若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

    影片