產品詳細資料

Vin (max) (V) 15 Features Integrated ADC, Overtemperature protection, Overvoltage protection, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Device type Pack monitor Operating temperature range (°C) -40 to 125 Rating Automotive Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 4.5 TI functional safety category Functional Safety-Compliant Communication interface Daisy chain, SPI controller, UART Operating current (typ) (µA) 10400
Vin (max) (V) 15 Features Integrated ADC, Overtemperature protection, Overvoltage protection, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Device type Pack monitor Operating temperature range (°C) -40 to 125 Rating Automotive Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 4.5 TI functional safety category Functional Safety-Compliant Communication interface Daisy chain, SPI controller, UART Operating current (typ) (µA) 10400
HTQFP (PAP) 64 144 mm² 12 x 12
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • Differential voltage measurements with integrated filtering
    • Pack+ , Fuse, Link±, Charge± measure
    • Isolation resistance voltage measurement
  • Integrated precision current measurement
    • Support low-side shunt resistor
  • Insulation resistance monitoring capability
  • 8 GPIO inputs as IO, SPI, ADC, and temperature sense
  • Isolated differential daisy-chain communication with optional ring architecture
    • Simplifies BJB/BDU system by eliminating safety MCU, CAN transceivers, and multi-wire interface
  • UART host interface
  • Synchronized current and voltage measurements
  • Stackable as well as syncs with other cell and UI monitors 16S (BQ79616-Q1, BQ79656-Q1), 14S (BQ79614-Q1, BQ79654-Q1), 12S (BQ79612-Q1, BQ79652-Q1) and BQ79631
  • Built-in SPI master
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • Differential voltage measurements with integrated filtering
    • Pack+ , Fuse, Link±, Charge± measure
    • Isolation resistance voltage measurement
  • Integrated precision current measurement
    • Support low-side shunt resistor
  • Insulation resistance monitoring capability
  • 8 GPIO inputs as IO, SPI, ADC, and temperature sense
  • Isolated differential daisy-chain communication with optional ring architecture
    • Simplifies BJB/BDU system by eliminating safety MCU, CAN transceivers, and multi-wire interface
  • UART host interface
  • Synchronized current and voltage measurements
  • Stackable as well as syncs with other cell and UI monitors 16S (BQ79616-Q1, BQ79656-Q1), 14S (BQ79614-Q1, BQ79654-Q1), 12S (BQ79612-Q1, BQ79652-Q1) and BQ79631
  • Built-in SPI master

BQ79631-Q1 provides high-accuracy measurement capable of measuring divided down voltages from high voltage nodes such as Pack+ (HV Battery Positive terminal), Fuse, Charge (Port), Link (Load) in a battery junction box (BJB) or battery disconnect unit (BDU) system. Key voltage measurements can make use of the integrated digital low-pass filters. The device has a highly accurate integrated current sense ADC capable of measuring current in low-side shunt resistor. The device is capable of measuring the insulation resistance with internal ADC and able to control any switching scheme needed for this measurement. There are eight GPIOs/auxillary inputs that can be used for thermistor measurement, driving relays, measuring voltages, and being a master SPI interface to peripheral SPI devices. The isolated bi-directional daisy-chain ports support both capacitor or transformer based isolation. The device also supports communication over UART.

Host communication to the BQ79631-Q1 can be connected via the device’s dedicated UART interface or through a communication bridge device, BQ79600-Q1. Additionally, an isolated, differential daisy-chain communication interface allows the host to communicate with the other UIR monitors and even cell monitors over a single interface. In the event of a communication line break, the daisy-chain communication interface is configurable to a ring architecture that allows the host to talk to devices at either end of the stack.

BQ79631-Q1 provides high-accuracy measurement capable of measuring divided down voltages from high voltage nodes such as Pack+ (HV Battery Positive terminal), Fuse, Charge (Port), Link (Load) in a battery junction box (BJB) or battery disconnect unit (BDU) system. Key voltage measurements can make use of the integrated digital low-pass filters. The device has a highly accurate integrated current sense ADC capable of measuring current in low-side shunt resistor. The device is capable of measuring the insulation resistance with internal ADC and able to control any switching scheme needed for this measurement. There are eight GPIOs/auxillary inputs that can be used for thermistor measurement, driving relays, measuring voltages, and being a master SPI interface to peripheral SPI devices. The isolated bi-directional daisy-chain ports support both capacitor or transformer based isolation. The device also supports communication over UART.

Host communication to the BQ79631-Q1 can be connected via the device’s dedicated UART interface or through a communication bridge device, BQ79600-Q1. Additionally, an isolated, differential daisy-chain communication interface allows the host to communicate with the other UIR monitors and even cell monitors over a single interface. In the event of a communication line break, the daisy-chain communication interface is configurable to a ring architecture that allows the host to talk to devices at either end of the stack.

下載 觀看有字幕稿的影片 影片

索取更多資訊

提供完整的產品規格表和其他資訊。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet BQ79631-Q1 UIR Sensor with Voltage, Current, and Insulation Resistance Monitoring in EV/BMS HV Automotive Applications datasheet (Rev. A) PDF | HTML 2023年 11月 9日
Application note BQ79616-Q1 Software Design Reference (Rev. B) PDF | HTML 2023年 8月 21日
Technical article How to design an intelligent battery junction box for advanced EV battery manageme PDF | HTML 2023年 1月 4日
Technical article Intelligent junction box with voltage and current synchronization in EVs PDF | HTML 2022年 4月 8日
Certificate BQ79631EVM-039 EU RoHS Declaration of Conformity (DoC) 2021年 6月 9日
EVM User's guide BQ79631EVM Evaluation Module User's Guide PDF | HTML 2021年 2月 13日
User guide BQ79616-Q1 and BQ75614-Q1 Graphical User Interface (GUI) User's Guide 2020年 12月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

驅動程式或資料庫

BQ7961X-AUTOSAR-CDD BQ7961x Autosar complex device driver software

BQ7961X-Q1 CDD documentation repository
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
BQ79616-Q1 符合 ASIL-D 規範的 16 節串聯車用精密電池監控器、平衡器和整合式保護器 BQ79614-Q1 符合 ASIL-D 規範的車用 14-S 精密電池監控器、平衡器和整合式保護器 BQ79612-Q1 符合 ASIL-D 規範的車用 12-S 精密電池監控器、平衡器和整合式保護器 BQ79616H-Q1 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 BQ79616 配備堆疊介面的 16-S 精密電池監控器、平衡器和整合式保護器 BQ79631-Q1 具有電壓、電流和絕緣電阻感測的車用高電壓電池組監控器
驅動程式或資料庫

BQ7X61X-Q1-DEVELOPMENT BQ7x61x-Q1 development files

BQ7x61x-Q1 documentation repository
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
BQ75614-Q1 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 BQ79616 配備堆疊介面的 16-S 精密電池監控器、平衡器和整合式保護器 BQ79616-Q1 符合 ASIL-D 規範的 16 節串聯車用精密電池監控器、平衡器和整合式保護器 BQ79612-Q1 符合 ASIL-D 規範的車用 12-S 精密電池監控器、平衡器和整合式保護器 BQ79614-Q1 符合 ASIL-D 規範的車用 14-S 精密電池監控器、平衡器和整合式保護器 BQ79631-Q1 具有電壓、電流和絕緣電阻感測的車用高電壓電池組監控器
驅動程式或資料庫

BQ7X61X-Q1-FMEDA BQ7x61x-Q1 FMEDA files

BQ7x61x-Q1 FMEDA documentation repository
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
BQ75614-Q1 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 BQ79616 配備堆疊介面的 16-S 精密電池監控器、平衡器和整合式保護器 BQ79616-Q1 符合 ASIL-D 規範的 16 節串聯車用精密電池監控器、平衡器和整合式保護器 BQ79616H-Q1 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 BQ79614-Q1 符合 ASIL-D 規範的車用 14-S 精密電池監控器、平衡器和整合式保護器 BQ79612-Q1 符合 ASIL-D 規範的車用 12-S 精密電池監控器、平衡器和整合式保護器 BQ79631-Q1 具有電壓、電流和絕緣電阻感測的車用高電壓電池組監控器
驅動程式或資料庫

BQ7X61X-Q1-FUNCTIONAL-SAFETY-DOCS BQ7x61x-Q1 functional safety documents

BQ7X6X-Q1 functional safety documentation repository
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
BQ75614-Q1 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 BQ79616-Q1 符合 ASIL-D 規範的 16 節串聯車用精密電池監控器、平衡器和整合式保護器 BQ79614-Q1 符合 ASIL-D 規範的車用 14-S 精密電池監控器、平衡器和整合式保護器 BQ79612-Q1 符合 ASIL-D 規範的車用 12-S 精密電池監控器、平衡器和整合式保護器 BQ79616H-Q1 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 BQ79631-Q1 具有電壓、電流和絕緣電阻感測的車用高電壓電池組監控器
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PAP) 64 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片