HDC3021-Q1
- AEC-Q100 qualified for automotive applications
- Temperature Grade 1: –40°C to 125°C
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4
- Functional Safety-Capable
- Relative humidity (RH) sensor:
- Operating range: 0% to 100%
- Accuracy: ±0.5% typical
- Offset Error Correction: reduces offset to return device to within accuracy specification
- Long-term drift: 0.19%RH/yr
- Condensation protection with integrated heater
- Temperature sensor:
- Operating range: –40°C to 125°C
- Accuracy: ±0.1°C typical
- NIST traceability: relative humidity & temperature
- Low power: average current 0.4 µA
- I 2C interface compatibility up to 1-MHz speeds
- Four selectable I 2C addresses
- Data protection through CRC checksum
- Supply voltage: 1.62 V to 5.50 V
- Available auto measurement mode
- Programmable interrupts
- Programmable RH and Temp measurement offset
- Factory-installed polyimide tape assembly cover
- Factory-installed IP67 rated environmental cover
- WSON package with wettable flanks options
The HDC302x-Q1 is an integrated capacitive based relative humidity (RH) and temperature sensor. The device provides high accuracy measurements over a wide supply range (1.62 V – 5.5 V), along with ultra-low power consumption in a compact 2.5-mm × 2.5-mm package. Both the temperature and humidity sensors are 100% tested and trimmed on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 standards.
Offset Error Correction reduces RH sensor offset due to aging, exposure to extreme operating conditions, and contaminants to return device to within accuracy specifications. For battery IoT applications, auto measurement mode and ALERT feature enable low system power by maximizing MCU sleep time. There are four different I 2C addresses that support speeds up to 1 MHz. A heating element is available to dissipate condensation and moisture.
The HDC3020 -Q1 is an open cavity package without protective cover. Two device variants have a cover option to protect the open cavity RH sensor: HDC3021 -Q1 and HDC3022 -Q1. HDC3021 -Q1 has removable protective tape to allow conformal coatings and PCB wash. HDC3022 -Q1 has a permanent IP67 filter membrane to protect against dust, water and PCB wash. All three package variants have wettable flanks option.
您可能會感興趣的類似產品
具備升級功能，可直接投入使用替代所比較的產品
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | HDC302x-Q1 Automotive 0.5%RH Digital Relative Humidity Sensor, 0.19%RH/yr Long Term Drift, 4s Response, Offset Error Correction, 0.1°C Temperature Sensor datasheet (Rev. C) | PDF | HTML | 2023年 3月 24日 |
| * | User guide | HDC302x Silicon Users Guide (Rev. C) | PDF | HTML | 2023年 7月 13日 |
| Application brief | Using RH to Derive Vapor Pressure, Dew Point, Absolute Humidity, and Enthalpy | PDF | HTML | 2023年 2月 9日 | |
| Application brief | Improving System Reliability in Auto and Ind. Cameras w/ AccurateTemp. Sensing | PDF | HTML | 2022年 1月 3日 | |
| Application brief | Leveraging Relative Humidity Sensor Enhanced Features for Ultra-Low-Power System (Rev. A) | PDF | HTML | 2021年 9月 1日 | |
| Application brief | How the HDC3020 Humidity Sensor Family Achieves The Industry's Lowest Drift (Rev. A) | PDF | HTML | 2021年 8月 31日 | |
| Technical article | Interface to sensors in seconds with ASC Studio | PDF | HTML | 2020年 11月 12日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
HDC3020EVM — 適用於溫度和濕度感測器的 HDC3020 耗評估模組
設計人員可利用 HDC3020EVM 評估模組 (EVM) 評估 HDC3020 相對濕度及溫度感測器的操作和性能。此 EVM 託管 MSP430F5528 微控制器 (µC) 以及 HDC3020。µC 用於控制 HDC3020 並透過 USB 埠與主機 PC 通訊。如有必要 EVM 的設計可分成兩個部分。穿孔允許使用者中斷 HDC3020 的連接，以靈活地進行評估。
| 封裝 | 引腳 | 下載 |
|---|---|---|
| WSON (DEH) | 8 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點