OPTECKS-3P-TNIR

DLP(R) NIRscan Nano Transmissive EVM (Evaluation Modules & Boards)

OPTECKS-3P-TNIR

From: Optecks, LLC
Order now

Overview

The DLP NIRscan nano transmissive EVM is designed for performing spectroscopic measurements on samples in the near infrared spectrum. The high performance transmissive module positions a sample between the illuminating source and the input of the NIRscan Nano to allow spectroscopic measurements based on transmission through the sample. The optical design maximizes coupling of the transmitted optical power to the spectrometer which increases the potential sensitivity and precision of measurements

Spectroscopy & optical networking products
DLP2010NIR DLP® 0.2 WVGA NIR DMD
Download View video with transcript Video

Order & start development

Evaluation board

2IN1TH — 2 in 1 DLP NIRscan Nano EVM

Evaluation board

TNIRNS — Transmissive DLP NIRscan Nano EVM

Evaluation board

TNIRNH — Transmissive Nano Module EVM

TI's Standard Terms and Conditions for Evaluation Items apply.

Related design resources

Hardware development

EVALUATION BOARD
DLPNIRNANOEVM DLP® NIRscan™ Nano Evaluation Module

Support & training

Third-party support
TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact Optecks, LLC.

Videos

Disclaimer

Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.