TPS2483EVM-157

TPS2483 Evaluation Module

TPS2483EVM-157

Order now

Overview

The Texas Instruments TPS2483EVM-157 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS2483 power-over-Ethernet powered device and DC/DC controller. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device features.

Features
  • 9-V to 36-V Input Range
  • Programmable MOSFET Power Limit
  • I2C™ Monitoring of Current, Voltage and Power
  • 16 Programmable Serial-Bus Addresses
  • Gate Drive for External N-Channel MOSFET
  • Programmable Fault Timer
  • High-Accuracy Current Monitoring
  • Dynamic Calibration
  • Open-Drain Power-Good Output
eFuses & hot swap controllers
TPS2482 9-V to 80-V hot swap controller with digital powermonitoring and latch off TPS2483 9-V to 80-V hot swap controller with digital powermonitoring and Auto Retry
Download View video with transcript Video

Order & start development

Evaluation board

TPS2483EVM-157 — TPS2483 Evaluation Module

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Calculation tool

TPS2480-81-90-91-92-93_CALC — TPS249x8x Design Calculator Rev B

Supported products & hardware
Download

TPS2480-81-90-91-92-93_CALC TPS249x8x Design Calculator Rev B

close
Latest version
Version: 01.00.00.0J
Release date: 08 Jan 2020

Checksum
Products
eFuses & hot swap controllers
TPS2480 9-V to 80-V hot swap controller with I2C current monitor and latch off TPS2481 9-V to 80-V hot swap controller with I2C current monitor and Auto Retry TPS2482 9-V to 80-V hot swap controller with digital powermonitoring and latch off TPS2483 9-V to 80-V hot swap controller with digital powermonitoring and Auto Retry TPS2490 9-V to 80-V hot swap controller with power limiting and latch off TPS2491 9-V to 80-V hot swap controller with power limiting and Auto Retry TPS2492 9-V to 80-V hot swap controller with power limiting, latch off and analog current monitor TPS2493 9-V to 80-V hot swap controller with power limiting, Auto Retry and analog current monitor
Hardware development
Evaluation board
TPS2483EVM-157 TPS2483 Evaluation Module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/slvc033 or www.ti.com/lit/xx/slvc033j/slvc033j.zip has been migrated to a new user experience at www.ti.com/tool/download/SLVC033. Please update any bookmarks accordingly.
Calculation tool

TPS2482-3_CALC — TPS2482/TPS2483 Monitoring Accuracy Calculator

Supported products & hardware
Download

TPS2482-3_CALC TPS2482/TPS2483 Monitoring Accuracy Calculator

close
Latest version
Version: 01.00.00.0B
Release date: 12 Mar 2013
Products
eFuses & hot swap controllers
TPS2482 9-V to 80-V hot swap controller with digital powermonitoring and latch off TPS2483 9-V to 80-V hot swap controller with digital powermonitoring and Auto Retry
Hardware development
Evaluation board
TPS2483EVM-157 TPS2483 Evaluation Module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/slvc457 or www.ti.com/lit/xx/slvc457b/slvc457b.zip has been migrated to a new user experience at www.ti.com/tool/download/SLVC457. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

No results found. Please clear your search and try again.
View all 3
Type Title Date
Certificate TPS2483EVM-157 EU Declaration of Conformity (DoC) 02 Jan 2019
Data sheet 36V Hotswap Controller with Digital Power Monitoring datasheet (Rev. A) 15 Mar 2013
EVM User's guide EVM User Guide for TPS2482 and TPS2483 20 Nov 2012

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos