TIDA-00289
適用於具有柱塞故障偵測功能的 24V DC 電磁閥的電流控制驅動器參考設計
TIDA-00289
概覽
TIDA-00289 integrates current control and plunger movement detection into the solenoid coil. Various applications in the field of industrial automation and material processing will benefit from up to 70% reduced power consumption, accelerated process time, greatly simplified usage and enhanced monitoring capabilities.
特點
- PWM-based current control optimizes power consumption for peak and hold time according to fixed time settings
- Two options for plunger movement detection: back-EMF and hall sensor based
- Automatic switchover from peak-to-hold current mode at the end of completion of plunger movement
- Activates alarm signal on detection of faulty plunger movement, under voltage or controller over temperature
- Complies with EN55011-Class A conducted emission limits
工業
- Cooking top
- DC 快速充電站
- Dishwasher
- EV 充電站電源模組
- Fuel cell inverter
- Hydraulic/Pneumatic actuator drive
- L1 家用充電器
- L2 Residential Chargers
- L2 商業充電器
- Micro inverter
- Oxygen concentrator
- Power conversion system (PCS)
- Power conversion system (PCS)
- Single phase string inverter
- Single phase wireless EV charging station
- Three phase wireless EV charging station
- Traction drive
- UPS - 三相
- UPS - 三相
- UPS - 單相線上
- UPS - 單相線上
- UPS - 單相線上
- Washer & dryer
- 三相串列式轉換器
- 中央轉換器
- 冰箱與冷凍庫
- 咖啡機
- 快速關機
- 排油煙機
- 排油煙機
- 接觸器和電源繼電器
- 攪拌器、果汁機和食物調理機
- 烤箱
- 熱泵逆變器板
- 病患監測器血壓模組
- 空氣清淨機與加濕機
- 空調室內單元
- 空調室外單元
- 飛行控制單元
已開發完全組裝的電路板，僅供測試與性能驗證，且為非賣品。
設計檔案與產品
設計檔案
下載立即可用的系統檔案以加速您的設計流程。
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 設計指南 | Current Controlled Driver for 24-V DC Solenoid With Plunger Fault Detection | 2014/11/5 | |||
| 白皮書 | Detection of Plunger Movement in DC Solenoids White Paper | 2015/6/12 |