DRV5023
- Digital Unipolar-Switch Hall Sensor
- Superior Temperature Stability
- Sensitivity ±10% Over Temperature
- Multiple Sensitivity Options
(BOP / BRP):
- 3.5 / 2 mT (FA)
- 6.9 / 3.2 mT (AJ)
- 14.5 / 6 mT (BI)
- Supports a Wide Voltage
Range
- 2.5 to 38 V
- No External Regulator Required
- Wide Operating Temperature
Range
- TA = –40 to 125°C (Q)
- Open Drain Output (30-mA Sink)
- Fast 35-µs Power-On Time
- Small Package and Footprint
- Surface Mount 3-Pin SOT-23 (DBZ)
- 2.92 mm × 2.37 mm
- Through-Hole 3-Pin TO-92 (LPG)
- 4.00 mm × 3.15 mm
- Surface Mount 3-Pin SOT-23 (DBZ)
- Protection
Features
- Reverse Supply Protection (up to –22 V)
- Supports up to 40-V Load Dump
- Output Short-Circuit Protection
- Output Current Limitation
All trademarks are the property of their respective owners.
The DRV5023 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.
When the applied magnetic flux density exceeds the BOP threshold, the DRV5023 open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The output current sink capability is 30 mA. A wide operating voltage range from 2.5 to 38 V with reverse polarity protection up to –22 V makes the device suitable for a wide range of industrial applications.
Internal protection functions are provided for reverse supply conditions, load dump, and output short circuit or over current.
For all available packages, see the orderable addendum at the end of the data sheet.您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN 是一款軟體工具,可幫助磁鐵與霍爾效應感測器系統的快速重複設計。
TIDA-00284 — 適用於 230V AC 電磁閥的電流控制驅動器參考設計
TIDA-00284 建議將電流控制和柱塞移動偵測整合至 AC 電磁線圈中。此參考設計提供控制電磁閥電流的解決方案,使用 PWM 式控制器和霍爾感測器來偵測柱塞動作,並從尖峰電流切換至保持電流模式。透過降低功耗高達 70%、加快製程時間、大幅簡化使用並強化監控功能,將可為工業自動化與材料處理領域中的各種應用帶來助益。
TIDA-00289 — 適用於具有柱塞故障偵測功能的 24V DC 電磁閥的電流控制驅動器參考設計
TIDA-00289 將電流控制和柱塞移動偵測整合到電磁線圈中。透過降低功耗高達 70%、加快製程時間、大幅簡化使用並強化監控功能,將可為工業自動化與材料處理領域中的各種應用帶來助益。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
| TO-92 (LPG) | 3 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。