SLVUCR9B August   2023  – January 2024 TPS2HCS10-Q1

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Assembly Instructions
    2. 2.2 Revision Differences
    3. 2.3 Jumper Information
    4. 2.4 Interfaces
    5. 2.5 Test Points
    6. 2.6 Transient Testing
  9. 3Software
    1. 3.1 Software Usage
      1. 3.1.1  Command Center View
      2. 3.1.2  I2T Tuner
      3. 3.1.3  Device Settings
      4. 3.1.4  Channel Settings
      5. 3.1.5  Console View
      6. 3.1.6  Log View
      7. 3.1.7  Importing/Exporting
      8. 3.1.8  Firmware Updates
      9. 3.1.9  Persist Settings
      10. 3.1.10 Language Settings
    2. 3.2 Software Development
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Revision History

Get Started

  1. Order both the HSS-HCMOTHERBRDEVM and an accompanying daughter card (such as the HSS-2HCS10EVM) on ti.com.(1)
  2. Plug the daughter card into the socket of the motherboard aligning the dots to signify pin 1.
  3. Connect a power supply to the VBB line (J9) and connect the ground of the power supply to the ground line of the board.
  4. Connect the relevant loads to the outputs of the board (J4 and J6).
  5. Download the Smart Fuse Configurator from the EVM product page.
  6. Open the Smart Fuse Configurator host program and use as described in this document.
1. The daughter cards and mother boards have two separate orderable numbers.