Startseite Datenwandler Integrierte & Spezialfunktions-Datenwandler Medizinische AFEs Biosensorik-AFEs
Startseite
Datenwandler
Integrierte & Spezialfunktions-Datenwandler
Medizinische AFEs
Biosensorik-AFEs
NEU

AFE4510

AKTIV

Integriertes Analog-Frontend (AFE) für Bioimpedanzanalyse sowie elektrische und optische Biosensorik

Jetzt bestellen
Datenblatt

AFE4510

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Applications 1-lead ECG, Dry electrode ECG, Impedance spectroscopy, Optical-HRM Number of input channels 4 Resolution (Bits) 22 Number of LEDs 8 Interface type SPI Operating temperature range (°C) -40 to 85 Rating Catalog
Applications 1-lead ECG, Dry electrode ECG, Impedance spectroscopy, Optical-HRM Number of input channels 4 Resolution (Bits) 22 Number of LEDs 8 Interface type SPI Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YBG) 42 7.606386 mm² 2.997 x 2.538
  • Integrated signal chains for Bio-Z, EDA, ECG, PPG
  • Synchronized ECG, PPG enables PTT-based BP
  • Bio-Z signal acquisition:
    • Multi-frequency Body impedance Analysis with frequency programmable up to 250kHz
    • Low frequency excitation mode for EDA/GSR
    • Complex (I, Q). Tetrapolar impedance measurement
    • Sine-wave excitation with a 7-bit DAC
    • Calibration scheme to compensate for electrode impedance and achieve accurate BioZ
  • ECG signal acquisition:
    • 1-lead ECG signal acquisition up to 4kHz
    • Mode to configure as 2-channel ECG
    • INA gain programmable from 1.27 - 12.23
    • RLD output to set body bias through the third electrode
    • Input noise (0.5-150Hz): 0.5µVrms at gain of 12.23
    • >1GΩ input impedance, CMRR>100dB
    • Integrated 370 Hz anti-aliasing low pass filter
    • AC, DC lead-off detect: 1.6nA to 1µA
  • PPG signal acquisition:
    • Acquisition of 24 PPG signal sets (LED, AMB)
    • Supports PPG sensors at different data rates
    • Peak system SNR of 115 dB in 0.5-10Hz band enables high-accuracy SpO2 measurement
    • Low Current for Continuous Operation with a Typical Value: 19µA for the Receiver
  • PPG Transmitter:
    • 8-Bit Programmable LED Current with a range adjustable from 50mA to 300mA
    • LED Short Detection
    • Support of 16 LEDs in Common Anode configuration for SpO2, OHRM, Spectroscopy
  • PPG Receiver:
    • Supports 5 PDs, 4 parallel receive paths
    • Noise filtering with programmable bandwidth
    • Trans-impedance Gain: 3.7kΩ to 1MΩ
    • 8-bit Ambient Offset Subtraction DAC up to 256µA
    • 9-bit LED Offset Subtraction DAC up to 64µA
    • Digital Ambient Subtraction at ADC Output
  • EDA Signal Acquisition:
    • Low-power continuous EDA and PPG acquisition using the ECG receiver
    • Independent data rates for EDA and PPG acquisition with optimized power cycling
    • High-accuracy EDA signal chain for spot-check EDA using the BIA signal chain
  • Supports external clock and internal oscillator
  • Option to operate 2 AFEs in parallel
  • Option to configure the 5th PD input as a general purpose voltage measurement channel
  • FIFO with 384-sample Depth, SPI™
  • Supplies: RX,:1.7-1.9V, I/O: 1.15-1.9V, TX:3-5.5V
  • Integrated signal chains for Bio-Z, EDA, ECG, PPG
  • Synchronized ECG, PPG enables PTT-based BP
  • Bio-Z signal acquisition:
    • Multi-frequency Body impedance Analysis with frequency programmable up to 250kHz
    • Low frequency excitation mode for EDA/GSR
    • Complex (I, Q). Tetrapolar impedance measurement
    • Sine-wave excitation with a 7-bit DAC
    • Calibration scheme to compensate for electrode impedance and achieve accurate BioZ
  • ECG signal acquisition:
    • 1-lead ECG signal acquisition up to 4kHz
    • Mode to configure as 2-channel ECG
    • INA gain programmable from 1.27 - 12.23
    • RLD output to set body bias through the third electrode
    • Input noise (0.5-150Hz): 0.5µVrms at gain of 12.23
    • >1GΩ input impedance, CMRR>100dB
    • Integrated 370 Hz anti-aliasing low pass filter
    • AC, DC lead-off detect: 1.6nA to 1µA
  • PPG signal acquisition:
    • Acquisition of 24 PPG signal sets (LED, AMB)
    • Supports PPG sensors at different data rates
    • Peak system SNR of 115 dB in 0.5-10Hz band enables high-accuracy SpO2 measurement
    • Low Current for Continuous Operation with a Typical Value: 19µA for the Receiver
  • PPG Transmitter:
    • 8-Bit Programmable LED Current with a range adjustable from 50mA to 300mA
    • LED Short Detection
    • Support of 16 LEDs in Common Anode configuration for SpO2, OHRM, Spectroscopy
  • PPG Receiver:
    • Supports 5 PDs, 4 parallel receive paths
    • Noise filtering with programmable bandwidth
    • Trans-impedance Gain: 3.7kΩ to 1MΩ
    • 8-bit Ambient Offset Subtraction DAC up to 256µA
    • 9-bit LED Offset Subtraction DAC up to 64µA
    • Digital Ambient Subtraction at ADC Output
  • EDA Signal Acquisition:
    • Low-power continuous EDA and PPG acquisition using the ECG receiver
    • Independent data rates for EDA and PPG acquisition with optimized power cycling
    • High-accuracy EDA signal chain for spot-check EDA using the BIA signal chain
  • Supports external clock and internal oscillator
  • Option to operate 2 AFEs in parallel
  • Option to configure the 5th PD input as a general purpose voltage measurement channel
  • FIFO with 384-sample Depth, SPI™
  • Supplies: RX,:1.7-1.9V, I/O: 1.15-1.9V, TX:3-5.5V

The AFE4510 is a versatile signal acquisition system that supports acquiring PPG, EDA, ECG, and Bio-impedance signals. A PPG signal chain comprises a current driver for LEDs and a receiver that senses the signal from PDs. An ECG receiver with a Right-leg drive (RLD) can acquire a single-lead ECG from a pair of electrodes. An impedance measurement signal chain with integrated excitation & sense can be used for applications like BIA, EDA, and Impedance spectroscopy. The outputs of the various signal chains are digitized by a common ADC and stored in a FIFO which can be read out using an SPI interface

The AFE4510 is a versatile signal acquisition system that supports acquiring PPG, EDA, ECG, and Bio-impedance signals. A PPG signal chain comprises a current driver for LEDs and a receiver that senses the signal from PDs. An ECG receiver with a Right-leg drive (RLD) can acquire a single-lead ECG from a pair of electrodes. An impedance measurement signal chain with integrated excitation & sense can be used for applications like BIA, EDA, and Impedance spectroscopy. The outputs of the various signal chains are digitized by a common ADC and stored in a FIFO which can be read out using an SPI interface
filter Andere Biosensorik-AFEs suchen
Herunterladen Video mit Transkript ansehen Video

Weitere Informationen anfordern

Das vollständige Datenblatt und weitere Designressourcen sind erhältlich. Jetzt anfordern

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet AFE4510 Ultra Small, Integrated AFE for Bio Impedance Analysis, Electrical Bio Sensing & Optical Bio Sensing datasheet PDF | HTML 21 Mär 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins Herunterladen
DSBGA (YBG) 42 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos