LM324-MIL

Name: LM324-MIL
Brand: TI
SKU: LM324-MIL
Price: 0.34 USD

AKTIV

Vierfach-Operationsverstärker, 30 V, 1,2 MHz (Militär)

Jetzt bestellen

Datenblatt

document-pdfAcrobat LM324-MIL Quadruple Operational Amplifier datasheet (Englisch) PDF | HTML

LM324-MIL

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Military

Operating temperature range (°C)

-40 to 85

Rating

Military

Operating temperature range (°C)

-40 to 85

WAFERSALE (YS)

—

See data sheet

Wide Supply Ranges
- Single Supply: 3 V to 32 V
- Dual Supplies: ±1.5 V to ±16 V
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typical
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters
- Input Offset Voltage: 3 mV Typical
- Input Offset Current: 2 nA Typical
- Input Bias Current: 20 nA Typical
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage:
32 V
Open-Loop Differential Voltage Amplification:
100 V/mV Typical
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535,
All Parameters are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.

Wide Supply Ranges
- Single Supply: 3 V to 32 V
- Dual Supplies: ±1.5 V to ±16 V
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typical
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters
- Input Offset Voltage: 3 mV Typical
- Input Offset Current: 2 nA Typical
- Input Bias Current: 20 nA Typical
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage:
32 V
Open-Loop Differential Voltage Amplification:
100 V/mV Typical
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535,
All Parameters are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.

This device consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages.

open-in-new

Andere Die- & Wafer-Services suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 10

	Typ	Titel		Datum
*	Data sheet	LM324-MIL Quadruple Operational Amplifier datasheet	PDF \| HTML	21 Jun 2017
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics		28 Mär 2017
	Application note	AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)		06 Mai 2013
	Application note	AN-262 Applying Dual and Quad FET Op Amps (Rev. B)		06 Mai 2013
	Application note	AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B)		05 Mai 2013
	Application note	AN-30 Log Converters (Rev. B)		01 Mai 2013
	Application note	AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B)		01 Mai 2013
	Application note	AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B)		23 Apr 2013
	Application note	AN-263 Sine Wave Generation Techniques (Rev. C)		22 Apr 2013
	Application note	Audio Applications of Linear Integrated Circuits		02 Mai 2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.