Startseite Audio Audioverstärker Kopfhörerverstärker
Startseite
Audio
Audioverstärker
Kopfhörerverstärker

LM48820

AKTIV

95-mW-Stereo-Kopfhörerverstärker mit Analog-Eingang und fester 1,5 V/V-Verstärkung

Jetzt bestellen
Datenblatt

LM48820

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Output power (W) 0.095 Analog supply (min) (V) 1.6 Analog supply voltage (max) (V) 4.5 Load (min) (Ω) 16 PSRR (dB) 80 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control No Shutdown current (ISD) (µA) 0.05 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 2.3
Output power (W) 0.095 Analog supply (min) (V) 1.6 Analog supply voltage (max) (V) 4.5 Load (min) (Ω) 16 PSRR (dB) 80 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control No Shutdown current (ISD) (µA) 0.05 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 2.3
DSBGA (YFR) 14 3.24 mm² 1.8 x 1.8
  • Available in Space Saving 0.4mm Pitch DSBGA Package
  • Fixed Logic Levels
  • Ground Referenced Outputs
  • High PSRR
  • Ultra Low Current Shutdown Mode
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • Soft Start Feature Reduces Start up Transient Current

Key Specifications

  • Improved PSRR at 217Hz: 80dB (typ)
  • Power Output at VDD = 3V, RL = 16Ω, THD+N = 1%: 95mW (typ)
  • Shutdown Current: 0.05μA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Wide Operating Voltage Range: 1.6V to 4.5V

All trademarks are the property of their respective owners.

  • Available in Space Saving 0.4mm Pitch DSBGA Package
  • Fixed Logic Levels
  • Ground Referenced Outputs
  • High PSRR
  • Ultra Low Current Shutdown Mode
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • Soft Start Feature Reduces Start up Transient Current

Key Specifications

  • Improved PSRR at 217Hz: 80dB (typ)
  • Power Output at VDD = 3V, RL = 16Ω, THD+N = 1%: 95mW (typ)
  • Shutdown Current: 0.05μA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Wide Operating Voltage Range: 1.6V to 4.5V

All trademarks are the property of their respective owners.

The LM48820 is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of continuous average power into a 16Ω single-ended load, with less than 1% THD+N from a 3V power supply.

The LM48820 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal number of external components. The LM48820 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other portable applications.

The LM48820 features a low-power consumption shutdown mode selectable for each channel and a soft start function that reduces start-up current transients. Additionally, the LM48820 features an internal thermal shutdown protection mechanism.

The LM48820 contains advanced pop and click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM48820 has an internal fixed gain of 1.5V/V.

The LM48820 is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of continuous average power into a 16Ω single-ended load, with less than 1% THD+N from a 3V power supply.

The LM48820 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal number of external components. The LM48820 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other portable applications.

The LM48820 features a low-power consumption shutdown mode selectable for each channel and a soft start function that reduces start-up current transients. Additionally, the LM48820 features an internal thermal shutdown protection mechanism.

The LM48820 contains advanced pop and click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM48820 has an internal fixed gain of 1.5V/V.
open-in-new Andere Kopfhörerverstärker suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet LM48820 Ground-Ref, Ultra Low Noise, Fixed Gain, 95mW Stereo Headphone Amp datasheet (Rev. B) 02 Mai 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins Herunterladen
DSBGA (YFR) 14 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos