SN74LVTZ244

Name: SN74LVTZ244
Brand: TI
SKU: SN74LVTZ244
Price: 0.301 USD

AKTIV

8-Kanal-Puffer mit Bus-Hold, 2,7 bis 3,6 V mit TTL-kompatiblen CMOS-Eingängen und Tri-State-Ausgänge

Jetzt bestellen

Datenblatt

document-pdfAcrobat 3.3-V ABT Octal Buffers/Drivers With 3-State Outputs datasheet (Rev. C) (Englisch)

SN74LVTZ244

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Technology family

LVT

Supply voltage (min) (V)

2.7

Supply voltage (max) (V)

3.6

Number of channels

8

IOL (max) (mA)

64

Supply current (max) (µA)

15000

IOH (max) (mA)

-32

Input type

TTL-Compatible CMOS

Output type

3-State

Features

Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Power up 3-state, Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

LVT

Supply voltage (min) (V)

2.7

Supply voltage (max) (V)

3.6

Number of channels

8

IOL (max) (mA)

64

Supply current (max) (µA)

15000

IOH (max) (mA)

-32

Input type

TTL-Compatible CMOS

Output type

3-State

Features

Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Power up 3-state, Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

SSOP (DB)

20

56.16 mm² 7.2 x 7.8

TSSOP (PW)

20

41.6 mm² 6.5 x 6.4

State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low-Static Power Dissipation
High-Impedance State During Power Up and Power Down
Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Support Unregulated Battery Operation Down to 2.7 V
Typical V_OLP (Output Ground Bounce)< 0.8 V at V_CC = 3.3 V, T_A = 25°C
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), and Ceramic (J) DIPs

State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low-Static Power Dissipation
High-Impedance State During Power Up and Power Down
Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Support Unregulated Battery Operation Down to 2.7 V
Typical V_OLP (Output Ground Bounce)< 0.8 V at V_CC = 3.3 V, T_A = 25°C
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), and Ceramic (J) DIPs

These octal buffers/drivers are designed specifically for low-voltage (3.3-V) V_CC operation with the capability to provide a TTL interface to a 5-V system environment.

These devices are organized as two 4-bit line drivers with separate output-enable () inputs. When is low, the device passes data from the A inputs to the Y outputs. When is high, the outputs are in the high-impedance state.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74LVTZ244 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area.

The SN54LVTZ244 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVTZ244 is characterized for operation from -40°C to 85°C.

These octal buffers/drivers are designed specifically for low-voltage (3.3-V) V_CC operation with the capability to provide a TTL interface to a 5-V system environment.

These devices are organized as two 4-bit line drivers with separate output-enable () inputs. When is low, the device passes data from the A inputs to the Y outputs. When is high, the outputs are in the high-impedance state.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74LVTZ244 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area.

The SN54LVTZ244 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVTZ244 is characterized for operation from -40°C to 85°C.

open-in-new

Andere Nicht invertierende Puffer & Treiber suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	3.3-V ABT Octal Buffers/Drivers With 3-State Outputs datasheet (Rev. C)		01 Jul 1995

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

14-24-LOGIC-EVM — Generisches Logikprodukt-Evaluierungsmodul für 14-polige bis 24-polige D-, DB-, DGV-, DW-, DYY-, NS-

Das 14-24-LOGIC-EVM-Evaluierungsmodul (EVM) ist für die Unterstützung aller Logikgeräte konzipiert, die sich in einem 14-Pin- bis 24-Pin-D-, DW-, DB-, NS-, PW-, DYY- oder DGV-Gehäuse befinden.

Benutzerhandbuch: PDF | HTML

Nicht verfügbar auf TI.com

Gehäuse	Pins	Herunterladen
SOIC (DW)	20	Optionen anzeigen
SSOP (DB)	20	Optionen anzeigen
TSSOP (PW)	20	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

SN74LVTZ244

8-Kanal-Puffer mit Bus-Hold, 2,7 bis 3,6 V mit TTL-kompatiblen CMOS-Eingängen und Tri-State-Ausgänge

SN74LVTZ244

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Gleiche Funktionalität, gleiche Pinbelegung wie verglichener Baustein

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

14-24-LOGIC-EVM — Generisches Logikprodukt-Evaluierungsmodul für 14-polige bis 24-polige D-, DB-, DGV-, DW-, DYY-, NS-

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos