TAS5602

AKTIV

Class-D-Audioverstärker mit 20 W Stereo, 10 bis 26 V Versorgungsspannung und PWM-Eingang

Jetzt bestellen

Datenblatt

document-pdfAcrobat 20W Stereo (BTL) Digital Amplifier Power Stage datasheet (Rev. B) (Englisch)

TAS5602

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Audio input type

PWM

Architecture

Class-D

Speaker channels (max)

4

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

4

THD + N at 1 kHz (%)

0.04

Iq (typ) (mA)

35

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

26

PSRR (dB)

60

Operating temperature range (°C)

-40 to 85

Audio input type

PWM

Architecture

Class-D

Speaker channels (max)

4

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

4

THD + N at 1 kHz (%)

0.04

Iq (typ) (mA)

35

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

26

PSRR (dB)

60

Operating temperature range (°C)

-40 to 85

HTSSOP (DCA)

56

113.4 mm² 14 x 8.1

Supports Multiple Output Configurations
- 2×20-W into a 8-Ω BTL Load at 18 V
- 4×10-W into a 4-Ω SE Load at 18 V
- 2×10W (SE) + 1×20W (BTL) at 18 V
Thermally Enhanced Package
- DCA (56-pin HTTSOP)
Wide Voltage Range: 10V—26V
- No Separate Supply Required for Gate Drive
Efficient Class-D Operation Eliminates Need for Heat Sinks
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
- Constant Output Power Over Variation in Supply Voltage
Single Ended Inputs
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
APPLICATIONS
- Flat-Panel, Rear-Projection, and CRT TV
- Consumer Audio Applications

Supports Multiple Output Configurations
- 2×20-W into a 8-Ω BTL Load at 18 V
- 4×10-W into a 4-Ω SE Load at 18 V
- 2×10W (SE) + 1×20W (BTL) at 18 V
Thermally Enhanced Package
- DCA (56-pin HTTSOP)
Wide Voltage Range: 10V—26V
- No Separate Supply Required for Gate Drive
Efficient Class-D Operation Eliminates Need for Heat Sinks
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
- Constant Output Power Over Variation in Supply Voltage
Single Ended Inputs
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
APPLICATIONS
- Flat-Panel, Rear-Projection, and CRT TV
- Consumer Audio Applications

The TAS5602 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5602 can drive a speaker with an impedance as low as 4Ω. The high efficiency of the TAS5602 eliminates the need for an external heat sink.

A simple interface to a digital audio PWM processor is shown below. The TAS5602 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

The TAS5602 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5602 can drive a speaker with an impedance as low as 4Ω. The high efficiency of the TAS5602 eliminates the need for an external heat sink.

A simple interface to a digital audio PWM processor is shown below. The TAS5602 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

open-in-new

Andere Lautsprecherverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Klasse D-Audioverstärker der nächsten Generation mit 30 W Stereo und Analogeingang: TPA3118D2

30-W-Stereo-Verstärker der nächsten Generation (Klasse D) mit geringer Leerlaufverlustleistung (Analog-Eingang) für batteriebetriebene Systeme verfügbar: TPA3128D2

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

	Typ	Titel		Datum
*	Data sheet	20W Stereo (BTL) Digital Amplifier Power Stage datasheet (Rev. B)		30 Okt 2008
	EVM User's guide	TAS5602EVM2 - User Guide		19 Aug 2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	Herunterladen
HTSSOP (DCA)	56	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TAS5602

Class-D-Audioverstärker mit 20 W Stereo, 10 bis 26 V Versorgungsspannung und PWM-Eingang

TAS5602

Produktdetails

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos