ADC3444

ACTIVO

Convertidor analógico a digital (ADC) de cuatro canales, 14 bits y 125 MSPS

Detalles del producto

Sample rate (max) (Msps) 125 Resolution (Bits) 14 Number of input channels 4 Interface type Serial LVDS Analog input BW (MHz) 540 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 391 Architecture Pipeline SNR (dB) 73 ENOB (bit) 11.8 SFDR (dB) 93 Operating temperature range (°C) -40 to 85 Input buffer No
Sample rate (max) (Msps) 125 Resolution (Bits) 14 Number of input channels 4 Interface type Serial LVDS Analog input BW (MHz) 540 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 391 Architecture Pipeline SNR (dB) 73 ENOB (bit) 11.8 SFDR (dB) 93 Operating temperature range (°C) -40 to 85 Input buffer No
VQFN (RTQ) 56 64 mm² 8 x 8
  • Quad Channel
  • 14-Bit Resolution
  • Single Supply: 1.8 V
  • Serial LVDS Interface
  • Flexible Input Clock Buffer With Divide-by-1, -2, -4
  • SNR = 72.4 dBFS, SFDR = 87 dBc at
    fIN = 70 MHz
  • Ultra-Low Power Consumption:
    • 98 mW/Ch at 125 MSPS
  • Channel Isolation: 105 dB
  • Internal Dither and Chopper
  • Support for Multi-Chip Synchronization
  • Pin-to-Pin Compatible With 12-Bit Version
  • Package: VQFN-56 (8 mm × 8 mm)
  • Quad Channel
  • 14-Bit Resolution
  • Single Supply: 1.8 V
  • Serial LVDS Interface
  • Flexible Input Clock Buffer With Divide-by-1, -2, -4
  • SNR = 72.4 dBFS, SFDR = 87 dBc at
    fIN = 70 MHz
  • Ultra-Low Power Consumption:
    • 98 mW/Ch at 125 MSPS
  • Channel Isolation: 105 dB
  • Internal Dither and Chopper
  • Support for Multi-Chip Synchronization
  • Pin-to-Pin Compatible With 12-Bit Version
  • Package: VQFN-56 (8 mm × 8 mm)

The ADC344x devices are a high-linearity, ultra-low power, quad-channel, 14-bit, 25-MSPS to 125-MSPS, analog-to-digital converter (ADC) family. The devices are designed specifically to support demanding, high input frequency signals with large dynamic range requirements. An input clock divider allows more flexibility for system clock architecture design while the SYSREF input enables complete system synchronization.

The ADC344x family supports serial low-voltage differential signaling (LVDS) to reduce the number of interface lines, thus allowing for high system integration density. The serial LVDS interface is two-wire, where each ADC data are serialized and output over two LVDS pairs. Optionally, a one-wire serial LVDS interface is available. An internal phase-locked loop (PLL) multiplies the incoming ADC sampling clock to derive the bit clock that is used to serialize the 14-bit output data from each channel. In addition to the serial data streams, the frame and bit clocks are transmitted as LVDS outputs.

The ADC344x devices are a high-linearity, ultra-low power, quad-channel, 14-bit, 25-MSPS to 125-MSPS, analog-to-digital converter (ADC) family. The devices are designed specifically to support demanding, high input frequency signals with large dynamic range requirements. An input clock divider allows more flexibility for system clock architecture design while the SYSREF input enables complete system synchronization.

The ADC344x family supports serial low-voltage differential signaling (LVDS) to reduce the number of interface lines, thus allowing for high system integration density. The serial LVDS interface is two-wire, where each ADC data are serialized and output over two LVDS pairs. Optionally, a one-wire serial LVDS interface is available. An internal phase-locked loop (PLL) multiplies the incoming ADC sampling clock to derive the bit clock that is used to serialize the 14-bit output data from each channel. In addition to the serial data streams, the frame and bit clocks are transmitted as LVDS outputs.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Tipo Título Fecha
* Data sheet ADC344x Quad-Channel, 14-Bit, 25-MSPS to 125-MSPS, Analog-to-Digital Converters datasheet (Rev. B) PDF | HTML 17 abr 2017
EVM User's guide ADC3xxxEVM and ADC3xJxxEVM User's Guide (Rev. D) 24 ago 2018
White paper Minimum Power Specifications for High-Performance ADC Power-Supply Designs 31 mar 2016
Technical article Designing a power supply solution for pipeline ADCs – Part 2 PDF | HTML 04 sep 2015
Technical article Designing a power supply solution for pipeline ADCs – Part 1 PDF | HTML 03 sep 2015
Technical article How to filter out noise in your DC/DC design PDF | HTML 18 ago 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ADC3444EVM — Módulo de evaluación del convertidor analógico a digital ADC3444 de cuatro canales, 14 bits y 125 MS

The ADC3444 EVM demonstrates the performance of a low power quad 125Msps 14 bit ADC. It includes the ADC3444 device and TI voltage regulators to provide the necessary voltages. The input for the ADC is connected to a transformer input which can be connected to a 50 ohm single ended signal source. (...)

Guía del usuario: PDF
GUI para el módulo de evaluación (EVM)

SLAC667 ADC3xxx GUI Installer

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles

Productos y hardware compatibles

Productos
ADC de alta velocidad (≥ 10 MSPS)
ADC3244 Convertidor analógico a digital (ADC) de dos canales, 14 bits y 125 MSPS ADC32J45 Convertidor analógico a digital (ADC) de dos canales, 14 bits y 160 MSPS ADC3444 Convertidor analógico a digital (ADC) de cuatro canales, 14 bits y 125 MSPS ADC34J45 Convertidor analógico a digital (ADC) de cuatro canales, 14 bits y 160 MSPS
Desarrollo de hardware
Placa de evaluación
ADC3221EVM Módulo de evaluación del convertidor analógico a digital ADC3221 de dos canales, 12 bits y 25 MSPS ADC3224EVM Módulo de evaluación del convertidor analógico a digital ADC3224 de dos canales, 12 bits y 125 MSPS ADC3241EVM Módulo de evaluación del convertidor analógico a digital ADC3241 de dos canales, 14 bits y 25 MSPS ADC3242EVM Módulo de evaluación del convertidor analógico a digital ADC3242 de dos canales, 14 bits y 50 MSPS ADC3244EVM Módulo de evaluación de ADC ADC3244 de dos canales, 14 bits y 125 MSPS ADC32J25EVM Módulo de evaluación del convertidor analógico a digital ADC32J25 de dos canales, 12 bits y 160 MSPS ADC32J44EVM Módulo de evaluación del convertidor analógico a digital ADC32J44 de dos canales, 14 bits y 125 MSPS ADC32J45EVM Módulo de evaluación del convertidor analógico a digital ADC32J45 de dos canales, 14 bits y 160 MSPS ADC3423EVM Módulo de evaluación del convertidor analógico a digital ADC3423 de cuatro canales, 12 bits y 80 MSP ADC3424EVM Módulo de evaluación del convertidor analógico a digital ADC3424 de cuatro canales, 12 bits y 125 MS ADC3442EVM Módulo de evaluación del convertidor analógico a digital ADC3442 de cuatro canales, 14 bits y 50 MSP ADC3443EVM Módulo de evaluación del convertidor analógico a digital ADC3443 de cuatro canales, 14 bits y 80 MSP ADC3444EVM Módulo de evaluación del convertidor analógico a digital ADC3444 de cuatro canales, 14 bits y 125 MS ADC34J23EVM Módulo de evaluación del convertidor analógico a digital ADC34J23 de cuatro canales, 12 bits y 80 MS ADC34J24EVM Módulo de evaluación del convertidor analógico a digital ADC34J24 de cuatro canales, 12 bits y 125 M ADC34J25EVM Módulo de evaluación del convertidor analógico a digital ADC34J25 de cuatro canales, 12 bits y 160 M ADC34J42EVM Módulo de evaluación del convertidor analógico a digital ADC34J42 de cuatro canales, 14 bits y 50 MS ADC34J43EVM Módulo de evaluación del convertidor analógico a digital ADC34J43 de cuatro canales, 14 bits y 80 MS ADC34J44EVM Módulo de evaluación del convertidor analógico a digital ADC34J44 de cuatro canales, 14 bits y 125 M ADC34J45EVM Módulo de evaluación del convertidor analógico a digital ADC34J45 de cuatro canales, 14 bits y 160 M
Modelo de simulación

ADC3444 IBIS Model

SLAM232.ZIP (36 KB) - IBIS Model
Modelo de simulación

ADC3xxx Pspice Model

SLAM228.ZIP (15 KB) - PSpice Model
Modelo de simulación

ADC3xxx TINA Model

SLAM226.ZIP (3 KB) - TINA-TI Spice Model
Modelo de simulación

ADC3xxx TINA Reference Design

SLAM227.TSC (1083 KB) - TINA-TI Reference Design
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Paquete Pasadores Descargar
VQFN (RTQ) 56 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos