Inicio Circuitos integrados de gestión de baterías Circuitos integrados para cargadores de baterías
Inicio
Circuitos integrados de gestión de baterías
Circuitos integrados para cargadores de baterías

BQ24133

ACTIVO

Cargador de batería reductor síncrono de 1-3 celdas 2,5 A independiente con ruta de alimentación ext

Haga su pedido ahora
Hoja de datos

BQ24133

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of series cells 1, 2, 3 Charge current (max) (A) 2.5 Vin (max) (V) 17 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.2 Battery charge voltage (max) (V) 13.5 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path Vin (min) (V) 4.5 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1, 2, 3 Charge current (max) (A) 2.5 Vin (max) (V) 17 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.2 Battery charge voltage (max) (V) 13.5 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path Vin (min) (V) 4.5 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGY) 24 19.25 mm² 5.5 x 3.5
  • 1.6-MHz Synchronous switched-mode charger with 2.5-A integrated N-MOSFETs
  • Up to 92% efficiency
  • 30-V Input rating with adjustable overvoltage protection
    • 4.5-V to 17-V Input operating voltage
  • Battery charge voltage
    • 1-Cell, 2-cell, or 3-cell with 4.2 V/cell
  • High integration
    • Automatic Power Path selector between adapter and battery
    • Dynamic power management
    • Integrated 20-V switching MOSFETs
    • Integrated bootstrap diode
    • Internal digital soft start
  • Safety
    • Thermal regulation loop throttles back current to limit TJ = 120°C
    • Thermal shutdown
    • Battery thermistor sense hot/cold charge suspend and battery detect
    • Adjustable input overvoltage protection
    • Cycle-by-cycle current limit
  • Accuracy
    • ±0.5% Charge voltage regulation
    • ±5% Charge current regulation
    • ±6% Input current regulation
  • <15-µA Battery current with adapter removed
  • <1.5-mA Input current with adapter present and charge disabled package
  • 1.6-MHz Synchronous switched-mode charger with 2.5-A integrated N-MOSFETs
  • Up to 92% efficiency
  • 30-V Input rating with adjustable overvoltage protection
    • 4.5-V to 17-V Input operating voltage
  • Battery charge voltage
    • 1-Cell, 2-cell, or 3-cell with 4.2 V/cell
  • High integration
    • Automatic Power Path selector between adapter and battery
    • Dynamic power management
    • Integrated 20-V switching MOSFETs
    • Integrated bootstrap diode
    • Internal digital soft start
  • Safety
    • Thermal regulation loop throttles back current to limit TJ = 120°C
    • Thermal shutdown
    • Battery thermistor sense hot/cold charge suspend and battery detect
    • Adjustable input overvoltage protection
    • Cycle-by-cycle current limit
  • Accuracy
    • ±0.5% Charge voltage regulation
    • ±5% Charge current regulation
    • ±6% Input current regulation
  • <15-µA Battery current with adapter removed
  • <1.5-mA Input current with adapter present and charge disabled package

The BQ24133 device is a highly integrated stand-alone Li-Ion and Li-Polymer switched-mode battery charger with two integrated N-channel power MOSFETs. The device offers a constant-frequency synchronous PWM controller with high accuracy regulation of input current, charge current, and voltage. The BQ24133 closely monitors the battery pack temperature to allow charge only in a preset temperature window. The BQ24133 charges one, two, or three cells (selected by CELL pin) at a fixed 4.2 V/cell.

The BQ24133 charges the battery in three phases: preconditioning, constant current, and constant voltage.

The BQ24133 provides power path selector gate driver ACDRV/CMSRC on input NMOS pair ACFET (Q1) and RBFET (Q2), and BATDRV on a battery PMOS device (Q3). When the qualified adapter is present, the system is directly connected to the adapter. Otherwise, the system is connected to the battery. In addition, the power path prevents battery from boosting back to the input.

The BQ24133 charges the battery from a DC source as high as 17 V, including a car battery. The input overvoltage limit is adjustable through the OVPSET pin. The AVCC, ACP, and ACN pins have a 30-V rating. When a high-voltage DC source is inserted, Q1 and Q2 remain off to avoid high-voltage damage to the system.

For 1-cell applications where the battery is not removable, the system can be directly connected to the battery to simplify the power path design and reduce the cost. With this configuration, the battery can automatically supplement the system load if the adapter is overloaded.

The BQ24133 is available in a 24-pin, 5.5-mm × 3.5-mm thin VQFN package.

The BQ24133 device is a highly integrated stand-alone Li-Ion and Li-Polymer switched-mode battery charger with two integrated N-channel power MOSFETs. The device offers a constant-frequency synchronous PWM controller with high accuracy regulation of input current, charge current, and voltage. The BQ24133 closely monitors the battery pack temperature to allow charge only in a preset temperature window. The BQ24133 charges one, two, or three cells (selected by CELL pin) at a fixed 4.2 V/cell.

The BQ24133 charges the battery in three phases: preconditioning, constant current, and constant voltage.

The BQ24133 provides power path selector gate driver ACDRV/CMSRC on input NMOS pair ACFET (Q1) and RBFET (Q2), and BATDRV on a battery PMOS device (Q3). When the qualified adapter is present, the system is directly connected to the adapter. Otherwise, the system is connected to the battery. In addition, the power path prevents battery from boosting back to the input.

The BQ24133 charges the battery from a DC source as high as 17 V, including a car battery. The input overvoltage limit is adjustable through the OVPSET pin. The AVCC, ACP, and ACN pins have a 30-V rating. When a high-voltage DC source is inserted, Q1 and Q2 remain off to avoid high-voltage damage to the system.

For 1-cell applications where the battery is not removable, the system can be directly connected to the battery to simplify the power path design and reduce the cost. With this configuration, the battery can automatically supplement the system load if the adapter is overloaded.

The BQ24133 is available in a 24-pin, 5.5-mm × 3.5-mm thin VQFN package.
open-in-new Buscar otro/a Circuitos integrados para cargadores de baterías
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
BQ24610 ACTIVO Controlador independiente de carga de batería reductor de 1-6 celdas con entrada de 5 V-28 V This product is 10 A, 6S standalone buck switching controller
BQ25306 ACTIVO Cargador de batería independiente De 1 a 2 celdas, 17 V y 3 A. This product is 3 A, 2S standalone buck switching charger with integrated sense resistor, small footprint with integrated MOSTFET

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet BQ24133 1.6-MHz Synchronous Switched-Mode Li-Ion and Li-Polymer Stand-Alone datasheet (Rev. D) 24 sep 2020
Application note BQ241xx/BQ246xx Selection of Multi-Cell Standalone Switching Battery Chargers 31 dic 2019
Product overview Battery Management Solutions for Point of Sale Systems 18 ago 2014
Application note How to Review a Multicell Switching Charger Schematic 21 sep 2011
User guide bq24133 User's Guide 21 dic 2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ24133EVM-715-15V — Módulo de evaluación para cargador de batería de polímero de litio e iones de litio de modo conmutad

The BQ24133EVM-715-15V (-002) assists users in evaluating the bq24133 synchronous battery charger. The bq24133 is highly integrated stand-alone Li-ion and Li-polymer switch-mode battery charge controllers with two integrated N-channel power MOSFETs and power path selector gate driver. It offers a (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

BQ24133EVM-715-5V — Módulo de evaluación para cargador de batería de polímero de litio e iones de litio de modo conmutad

The BQ24133EVM-715-5V (-001) assists users in evaluating the bq24133 synchronous battery charger. The bq24133 is highly integrated stand-alone Li-ion and Li-polymer switch-mode battery charge controllers with two integrated N-channel power MOSFETs and power path selector gate driver. It offers a (...)

Guía del usuario: PDF
No disponible en TI.com
Herramienta de cálculo

SLUC244 — bqswitcherII calculation tools V1.2

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados para cargadores de baterías
BQ24130 — Cargador de batería reductor de 1-3 celdas para iones de litio y supercondensador BQ24133 — Cargador de batería reductor síncrono de 1-3 celdas 2,5 A independiente con ruta de alimentación ext BQ24170 — Cargador de batería reductor síncrono de 1-3 celdas 4A independiente con selector ruta de alimentaci BQ24171 — Cargador de batería reductor síncrono de 1-3 celdas 4 A independiente compatible con JEITA y ruta de BQ24172 — Cargador de batería reductor síncrono de 1-3 celdas y 4 A independiente
Descargar
Archivo Gerber

HPA715 Gerber Files

SLUC237.ZIP (267 KB)
Descargar
Diseños de referencia

PMP9491 — Diseño de referencia de estéreo de audio/altavoz portátil con convertidor elevador eficiente

PMP9491 is a 30W highly efficient and compact Portable Speaker/Audio Boom Box reference Design which can be used in 15W +15W Stereo or 30W Woofer Applications. The Power Source for the Design is 1 or 2 Li ion in Series . The design is broadly divided into three main stages:
  1. Highly efficient (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP4397 — Diseño de referencia de cargador de batería independiente 1-3S integrado compatible con EMI

The PMP4397 is a battery charger module reference design suitable for 2-cell battery applications with a DC input of 4.5V – 15V. Detailed data for radiated emissions compliance is provided. The cell number could be trimmed by resistors over a range from 1-cell to 3-cells. A typical (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDA-00027 — Diseño de referencia del cargador de batería independiente síncrono de 1.6 MHz de iones de litio o p

This reference design is highly integrated stand-alone Li-ion and Li-polymer switch-mode battery charge solution with two integrated N-channel power MOSFETs and a power path selector gate driver. It offers a constant-frequency synchronous PWM controller with high accuracy regulation of input (...)
Test report: PDF
Paquete Pasadores Descargar
VQFN (RGY) 24 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos