LM2576HV

Name: LM2576HV
Brand: TI
SKU: LM2576HV
Price: 3.661 USD

ACTIVO

Regulador reductor de recuento de componentes bajo de 3 A y 4 V a 60 V SIMPLE SWITCHER®

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM2576xx Series SIMPLE SWITCHER Power Converter 3-A Step-Down Voltage Regulator datasheet (Rev. G) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

LM76003

ACTIVO

Convertidor de tensión reductor síncrono de 3.5 V a 60 V y 3.5 A Smaller footprint in QFN package.

LM2576HV

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Iout (max) (A)

3

Vin (min) (V)

4

Vin (max) (V)

60

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

42

Switching frequency (max) (kHz)

63

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

37

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.005

Iout (max) (A)

3

Vin (min) (V)

4

Vin (max) (V)

60

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

42

Switching frequency (max) (kHz)

63

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

37

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.005

TO-220 (KC)

5

45.212 mm² 10.16 x 4.45

TO-220 (NDH)

5

86.0552 mm² 10.16 x 8.47

TO-220 (NEB)

5

86.0552 mm² 10.16 x 8.47

TO-263 (KTT)

5

154.8384 mm² 10.16 x 15.24

Newer products available:
- LMR51430 4.5 to 36-V, 3-A, 500-kHz and 1.1-MHz synchronous converter
- LM76003 3.5 to 60-V, 3.5-A, 300-kHz to 2.2-MHz synchronous converter
For faster time to market:
- TLVM13630 3 to 36-V, 3-A, 200-kHz to 2.2-MHz power module
3.3-V, 5-V, 12-V, 15-V, and adjustable output versions
Adjustable version output voltage range,1.23 V to 37 V (57 V for HV version) ±4% maximum over line and load conditions
Specified 3-A output current
Wide input voltage range: 40 V Up to 60 V for HV version
Requires only four external components
52-kHz fixed-frequency internal oscillator
TTL-shutdown capability, low-power standby mode
High efficiency
Uses readily available standard inductors
Create a custom design using the LMR33630 or LM76003 with the WEBENCH Power Designer

Newer products available:
- LMR51430 4.5 to 36-V, 3-A, 500-kHz and 1.1-MHz synchronous converter
- LM76003 3.5 to 60-V, 3.5-A, 300-kHz to 2.2-MHz synchronous converter
For faster time to market:
- TLVM13630 3 to 36-V, 3-A, 200-kHz to 2.2-MHz power module
3.3-V, 5-V, 12-V, 15-V, and adjustable output versions
Adjustable version output voltage range,1.23 V to 37 V (57 V for HV version) ±4% maximum over line and load conditions
Specified 3-A output current
Wide input voltage range: 40 V Up to 60 V for HV version
Requires only four external components
52-kHz fixed-frequency internal oscillator
TTL-shutdown capability, low-power standby mode
High efficiency
Uses readily available standard inductors
Create a custom design using the LMR33630 or LM76003 with the WEBENCH Power Designer

The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, 15 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include fault protection and a fixed-frequency oscillator.

The LM2576 series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some cases no heat sink is required.

A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50-µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

The LM76003 requires very few external components and has a pinout designed for simple, optimum PCB layout for EMI and thermal performance. See the device comparison table to compare specs.

The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, 15 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include fault protection and a fixed-frequency oscillator.

The LM2576 series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some cases no heat sink is required.

A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50-µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

The LM76003 requires very few external components and has a pinout designed for simple, optimum PCB layout for EMI and thermal performance. See the device comparison table to compare specs.

open-in-new

Buscar otro/a AC/DC & DC/DC converters (integrated FET)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 19

	Tipo	Título		Fecha
*	Data sheet	LM2576xx Series SIMPLE SWITCHER Power Converter 3-A Step-Down Voltage Regulator datasheet (Rev. G)	PDF \| HTML	22 mar 2023
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	25 mar 2024
	Application note	Switching regulator fundamentals (Rev. C)	PDF \| HTML	05 feb 2019
	Technical article	How to increase system reliability and simplify design using DC/DC converters	PDF \| HTML	13 jun 2016
	Technical article	The importance of accurate switching frequency and current limit when selecting bu	PDF \| HTML	19 abr 2016
	Technical article	Advantages of leaded packages in robust industrial designs	PDF \| HTML	08 mar 2016
	Application note	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		12 sep 2014
	Application note	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		24 abr 2013
	Application note	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		23 abr 2013
	Application note	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		23 abr 2013
	Application note	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		23 abr 2013
	Application note	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		23 abr 2013
	Application note	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		23 abr 2013
	Application note	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		23 abr 2013
	Application note	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		23 abr 2013
	Application note	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		23 abr 2013
	Application note	Input and Output Capacitor Selection		19 sep 2005
	More literature	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		12 jul 2005
	Application note	AN-643 EMI/RFI Board Design (Rev. B)		03 may 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.