Inicio Gestión de la energía AC/DC & DC/DC controllers (external FET)

LM2743

ACTIVO

Controlador reductor síncrono de modo de tensión de 2.2 V a 16 V con monitoreo

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
NUEVO TPS54KB20 ACTIVO Convertidor reductor síncrono de 4 V a 16 V y 25 A Higher power density integrated FET converter solution for up to 25A output current

Detalles del producto

Vin (min) (V) 2.2 Vin (max) (V) 16 Iout (max) (A) 20 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 13.5 Iq (typ) (A) 0.0015 Duty cycle (max) (%) 80 Number of phases 1
Vin (min) (V) 2.2 Vin (max) (V) 16 Iout (max) (A) 20 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 13.5 Iq (typ) (A) 0.0015 Duty cycle (max) (%) 80 Number of phases 1
TSSOP (PW) 14 32 mm² 5 x 6.4
  • Power stage input voltage from 1 V to 16 V
  • Control stage input voltage from 3 V to 6 V
  • Output voltage adjustable down to 0.6 V
  • Power-good flag and shutdown
  • Output overvoltage and undervoltage detection
  • ±2% Feedback voltage accuracy over temperature
  • Low-side adjustable current sensing
  • Adjustable soft start
  • Tracking and sequencing with shutdown and soft-start pins
  • Switching frequency from 50 kHz to 1 MHz
  • TSSOP-14 package
  • Create a custom design using the LM2743 with the WEBENCH® Power Designer
  • Power stage input voltage from 1 V to 16 V
  • Control stage input voltage from 3 V to 6 V
  • Output voltage adjustable down to 0.6 V
  • Power-good flag and shutdown
  • Output overvoltage and undervoltage detection
  • ±2% Feedback voltage accuracy over temperature
  • Low-side adjustable current sensing
  • Adjustable soft start
  • Tracking and sequencing with shutdown and soft-start pins
  • Switching frequency from 50 kHz to 1 MHz
  • TSSOP-14 package
  • Create a custom design using the LM2743 with the WEBENCH® Power Designer

The LM2743 is a high-speed synchronous buck regulator controller with an accurate feedback voltage accuracy of ±2%. It can provide simple down conversion to output voltages as low as 0.6 V. Though the control sections of the IC are rated for 3 V to 6 V, the driver sections are designed to accept input supply rails as high as 16 V. The use of adaptive non-overlapping MOSFET gate drivers helps avoid potential shoot-through problems while maintaining high efficiency. The IC is designed for the more cost-effective option of driving only N-channel MOSFETs in both the high-side and low-side positions. It senses the low-side switch voltage drop for providing a simple, adjustable current limit.

The fixed-frequency voltage-mode PWM control architecture is adjustable from 50 kHz to 1 MHz with one external resistor. This wide range of switching frequency gives the power supply designer the flexibility to make better tradeoffs between component size, cost and efficiency.

Features include soft start, input undervoltage lockout (UVLO) and Power Good (based on both undervoltage and overvoltage detection). In addition, the shutdown pin of the IC can be used for providing start-up delay, and the soft-start pin can be used for implementing precise tracking, for the purpose of sequencing with respect to an external rail.

The LM2743 is a high-speed synchronous buck regulator controller with an accurate feedback voltage accuracy of ±2%. It can provide simple down conversion to output voltages as low as 0.6 V. Though the control sections of the IC are rated for 3 V to 6 V, the driver sections are designed to accept input supply rails as high as 16 V. The use of adaptive non-overlapping MOSFET gate drivers helps avoid potential shoot-through problems while maintaining high efficiency. The IC is designed for the more cost-effective option of driving only N-channel MOSFETs in both the high-side and low-side positions. It senses the low-side switch voltage drop for providing a simple, adjustable current limit.

The fixed-frequency voltage-mode PWM control architecture is adjustable from 50 kHz to 1 MHz with one external resistor. This wide range of switching frequency gives the power supply designer the flexibility to make better tradeoffs between component size, cost and efficiency.

Features include soft start, input undervoltage lockout (UVLO) and Power Good (based on both undervoltage and overvoltage detection). In addition, the shutdown pin of the IC can be used for providing start-up delay, and the soft-start pin can be used for implementing precise tracking, for the purpose of sequencing with respect to an external rail.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 10
Tipo Título Fecha
* Data sheet LM2743 2.2-V to 16-V Input, voltage mode, synchronous buck controller with tracking datasheet (Rev. I) PDF | HTML 20 feb 2019
User guide LM2744 Buck Controller Evaluation Module User's Guide (Rev. B) PDF | HTML 23 feb 2022
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 21 jul 2016
Application note AN-1603 LM274X Reference Designs (Rev. C) 01 may 2013
EVM User's guide AN-1356 LM2743 Evaluation Board (Rev. A) 30 abr 2013
EVM User's guide AN-1640 LM2743-19A Demo Board (Rev. A) 26 abr 2013
Application note Current Limit Foldback Improves Short Circuit Protection in LM274X Family (Rev. B) 23 abr 2013
Application note Optmiz Pwr Cntrlr Dsigns thru Utiliz Freq & Sync, Ext Ref, Trking & Precis EN 24 abr 2008
Application note Power Management Considerations for FPGAs and ASICs 22 mar 2007

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM2743EVAL — Módulo de evaluación de controlador regulador reductor síncrono MOSFET de canal N de baja tensión

LM2743 N-Channel FET Synchronous Buck Regulator Controller for Conversion from 3.3V

Guía del usuario: PDF
Modelo de simulación

LM2743 PSpice Average Model

SNVM432.ZIP (58 KB) - PSpice Model
Modelo de simulación

LM2743 PSpice Transient Model

SNVM431.ZIP (226 KB) - PSpice Model
Modelo de simulación

LM2743 Unencrypted PSpice Average Model

SNVM846.ZIP (1 KB) - PSpice Model
Modelo de simulación

LM2743 Unencrypted PSpice Transient Model

SNVM845.ZIP (3 KB) - PSpice Model
Diseños de referencia

PMP30197 — Diseño de referencia de Fly-Buckboost sincrónico aislado de 5,85 W con optoacoplador

The PMP30197 reference design is an inverting Fly-BuckBoost power supply using the LM2743 to generate an isolated output voltage of 3.9V. The design accepts an input voltage of 2V to 5.25V.  The converter regulates the secondary side output with an optocoupler and is capable of achieving good (...)
Test report: PDF
Esquema: PDF
Paquete Pasadores Descargar
TSSOP (PW) 14 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos