Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)

LMR16006

ACTIVO

Regulador reductor SIMPLE SWITCHER® de 4 V a 60 V, 600 mA con bajo Iq

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LMR36006 ACTIVO Convertidor reductor síncrono ultrapequeño de 4,2 V a 60 V, 0,6 A High frequency and tight current limit to lower inductor size.

Detalles del producto

Iout (max) (A) 0.6 Vin (min) (V) 4 Vin (max) (V) 60 Topology Buck Type Converter Switching frequency (min) (kHz) 700 Switching frequency (max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Pre-Bias Start-Up, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 55 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000028
Iout (max) (A) 0.6 Vin (min) (V) 4 Vin (max) (V) 60 Topology Buck Type Converter Switching frequency (min) (kHz) 700 Switching frequency (max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Pre-Bias Start-Up, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 55 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000028
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • Ultra Low 28 µA Standby Current in ECO Mode
  • Input Voltage Range 4 V to 60 V
  • 1 µA Shutdown Current
  • High Duty Cycle Operation Supported
  • Output Current up to 600 mA
  • 0.7 MHz and 2.1 MHz Switching Frequency
  • Internal Compensation
  • High Voltage Enable Input
  • Internal Soft Start
  • Over Current Protection
  • Over Temperature Protection
  • Small Overall Solution Size (SOT-6L Package)
  • Ultra Low 28 µA Standby Current in ECO Mode
  • Input Voltage Range 4 V to 60 V
  • 1 µA Shutdown Current
  • High Duty Cycle Operation Supported
  • Output Current up to 600 mA
  • 0.7 MHz and 2.1 MHz Switching Frequency
  • Internal Compensation
  • High Voltage Enable Input
  • Internal Soft Start
  • Over Current Protection
  • Over Temperature Protection
  • Small Overall Solution Size (SOT-6L Package)

The LMR16006 is a PWM DC/DC buck (step-down) regulator. With a wide input range of 4 V to 60 V, it is suitable for a wide range of application from industrial to automotive for power conditioning from an unregulated source. The regulator’s standby current is 28 µA in ECO mode, which is suitable for battery operating systems. An ultra low 1 µA shutdown current can further prolong battery life. Operating frequency is fixed at 0.7 MHz (X version) and 2.1 MHz (Y version) allowing the use of small external components while still being able to have low output ripple voltage. Soft-start and compensation circuits are implemented internally, which allows the device to be used with minimized external components. The LMR16006 is optimized for up to 600 mA load currents. It has a 0.765 V typical feedback voltage. The device has built-in protection features such as pulse by pulse current limit, thermal sensing and shutdown due to excessive power dissipation. The LMR16006 is available in a low profile SOT-6L package.

The LMR16006 is a PWM DC/DC buck (step-down) regulator. With a wide input range of 4 V to 60 V, it is suitable for a wide range of application from industrial to automotive for power conditioning from an unregulated source. The regulator’s standby current is 28 µA in ECO mode, which is suitable for battery operating systems. An ultra low 1 µA shutdown current can further prolong battery life. Operating frequency is fixed at 0.7 MHz (X version) and 2.1 MHz (Y version) allowing the use of small external components while still being able to have low output ripple voltage. Soft-start and compensation circuits are implemented internally, which allows the device to be used with minimized external components. The LMR16006 is optimized for up to 600 mA load currents. It has a 0.765 V typical feedback voltage. The device has built-in protection features such as pulse by pulse current limit, thermal sensing and shutdown due to excessive power dissipation. The LMR16006 is available in a low profile SOT-6L package.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 24
Tipo Título Fecha
* Data sheet LMR16006 SIMPLE SWITCHER 60 V 0.6 A Buck Regulators With High Efficiency ECO Mode datasheet PDF | HTML 20 nov 2013
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25 mar 2024
Technical article Automotive LED blinkers made SIMPLE PDF | HTML 04 sep 2015
Application note Cap Drop Offline Supply for E-Meters 16 jun 2015
Application note Cost-Effective Transformerless Offline Supply for Light Load Applications (Rev. A) 16 jun 2015
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 12 sep 2014
EVM User's guide LMR16006 EVM User's Guide 13 jun 2014
Application note AN-1533 Overvoltage Protection Circuit for Automotive Load Dump (Rev. B) 06 may 2013
Application note AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 06 may 2013
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 24 abr 2013
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 23 abr 2013
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 23 abr 2013
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 23 abr 2013
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 23 abr 2013
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 23 abr 2013
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 23 abr 2013
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 23 abr 2013
Application note AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C) 23 abr 2013
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 23 abr 2013
Application note SIMPLE SWITCHER Regulators Take Over Automotive Applications (Rev. A) 23 abr 2013
Application note Understanding and Applying Current-Mode Control Theory 19 ago 2007
Application note Input and Output Capacitor Selection 19 sep 2005
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 12 jul 2005
Application note AN-643 EMI/RFI Board Design (Rev. B) 03 may 2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BOOSTXL-DRV8305EVM — Módulo de evaluación BoosterPack DRV8305N de accionamiento de motor trifásico

The BOOSTXL-DRV8305EVM is a 15A, 3-phase brushless DC drive stage based on the DRV8305 motor gate driver and CSD18540Q5B NexFET™ power MOSFET. The module has individual DC bus and phase voltage sense as well as individual low-side current shunt sense for sensorless BLDC algorithms. The module (...)

Guía del usuario: PDF
Placa de evaluación

BOOSTXL-DRV8320H — Módulo de evaluación DRV8320H del controlador Smart Gate trifásico (interfaz de hardware)

The BOOSTXL-DRV8320H evaluation module (EVM) is a 15A, 3-phase brushless DC drive stage based on the DRV8320H gate driver and CSD88399Q5DC dual-package MOSFETs.  The module has individual DC bus and phase voltage sense, making this EVM ideal for sensorless BLDC algorithms.  The EVM (...)
Guía del usuario: PDF
Placa de evaluación

BOOSTXL-DRV8320S — Módulo de evaluación DRV8320S del controlador Smart Gate trifásico (interfaz SPI)

The BOOSTXL-DRV8320S evaluation module (EVM) is a 15A, 3-phase brushless DC drive stage based on the DRV8320S gate driver and CSD88399Q5DC dual-package MOSFETs.  The module has individual DC bus and phase voltage sense, making this EVM ideal for sensorless BLDC algorithms.  The EVM (...)
Guía del usuario: PDF
Placa de evaluación

DRV3205EVM — Módulo de evaluación de controlador de puerta trifásico para automoción DRV3205-Q1

The Texas Instruments DRV3205 evaluation module (DRV3205EVM) helps designers evaluate the operation and performance of the DRV3205-Q1 and DRV3220-Q1 bridge driver for motor driver applications. The DRV3205EVM can be designed with may TI MCU families with  Micro-Control LaunchPads. The device (...)

Guía del usuario: PDF
Placa de evaluación

LMR16006XEVM — Convertidor reductor LMR16006XEVM de 6 V a 60 V de entrada, 5,0 V de salida a 600 mA

The LMR16006XEVM is a fully assembled and tested circuit for evaluating the LMR16006X Step-Down Converter. The LMR16006XEVM operates from 6V to 60V input (12V nominal) and provides a 5.0V output at 600mA. The board also has jumper connector to enable or disable the converter operation.

Guía del usuario: PDF
Placa de evaluación

LMR16006YEVM — Convertidor reductor LMR16006YEVM de 6 V a 60 V de entrada, 5,0 V de salida a 600 mA

The LMR16006YEVM is a fully assembled and tested circuit for evaluating the LMR16006Y Step-Down Converter. The LMR16006YEVM operates from 6V to 60V input (12V nominal) and provides a 5.0V output at 600mA. The board also has a jumper connector to enable or disable the converter operation.

Guía del usuario: PDF
Placa de evaluación

GENCN-3P-GCM00M02 — GCM00M02 de Shenzhen Gencon Technology: diseño de referencia para controles de motores de CC sin esc

El GCM00M02 de Shenzhen Gencon Technology es un diseño de referencia para controladores de motores de CC sin escobillas (BLDC), que pueden tener un funcionamiento continuo de hasta 60 W. Este diseño utiliza el microcontrolador MSPM0G3507 TI Arm® Cortex-M0®+ MCU y el circuito integrado (IC) DRV8316 (...)

Tarjeta secundaria

BOOSTXL-DRV8320RS — Controlador de puerta inteligente trifásico DRV8320RS con módulo de evaluación reductor de interfaz

The BOOSTXL-DRV8320RS is a 15A, 3-phase brushless DC drive stage based on the DRV8320RS gate driver and CSD88599Q5DC NexFET power blocks.  The module has individual DC bus and phase voltage sense, making this evaluation module ideal for sensorless BLDC algorithms.  The module supplies (...)
Guía del usuario: PDF | HTML
Modelo de simulación

LMR16006X Unencrypted PSPICE Transient Model (Rev. B)

SNVM690B.ZIP (169 KB) - PSpice Model
Modelo de simulación

LMR16006Y Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM691A.ZIP (170 KB) - PSpice Model
Modelo de simulación

LMR16006Y PSpice Unencrypted Average Model

SNVMC01.ZIP (83 KB) - PSpice Model
Diseños de referencia

TIDA-00375 — Diseño de referencia de puente UART a Wi-Fi con alimentación de 24 VCA

This reference design uses our SimpleLink Wi-Fi CC3200 internet-on-a-chip wireless MCU module to create a data bridge between existing hardware with a logic-level UART interface and a Wi-Fi network. The design also contains a simple switcher power supply with a wide-input range suitable (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00916 — Diseño de referencia FOC de alta velocidad sin sensor para Drone ESC

ESC modules are important subsystems for non-military drones and users demanding more efficient models that provide longer flight times and higher dynamic behavior with smoother and more stable performance. This design implements an Electronic Speed Controller (ESC) commonly used for unmanned (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-01415 — Diseño de referencia de luz LED RGBW, con atenuación del 0.15 %, de 100 W, alta resolución y 16 bits

This reference design demonstrates the finest range of color control of individual RGBW LED strings with > 16 bits of PWM resolution while supporting the PWM modulation frequencies as high as 30 and 50 kHz. This reference design demonstrates the finest range of individual RGBW LED strings color (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00643 — Diseño de referencia del controlador de hélice de drones de CC sin escobillas de alto rendimiento, d

The TIDA-00643 reference design is a 4.4 to 30 V brushless DC motor controller for high power drones, quadcopter, propeller, fan, and pump applications. It uses the Texas Instrument’s DRV8305 brushless DC motor gate driver, CSD17573Q5B 30V NexFET power MOSFETs, TPD4E05U06 TVS protection IC, (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

PMP4484 — Diseño de referencia de cadenas LED de 6 canales con entrada CA y salida de 30 W

The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming.  It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive  LED. (...)
Test report: PDF
Esquema: PDF
Paquete Pasadores Descargar
SOT-23-THN (DDC) 6 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos